Fire Extinguisher Sign – 3D Projecting 225 × 225 mm
Product code: PS-FIR015
A double-faced 225 × 225 mm polypropylene fire extinguisher sign that projects from the wall for clear visibility from both directions along corridors, aisles and shared work areas.
Material specification
This product is supplied only in Polypropylene (1.6mm); choose the approved size below.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
Includes $3.63 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $39.90 | — |
| 5-9 | $36.71 | 8% off |
| 10-24 | $33.92 | 15% off |
| 25-49 | $30.32 | 24% off |
| 50-99 | $27.13 | 32% off |
| 100+ | $23.94 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $39.90 | — |
| 5-9 | $36.71 | 8% off |
| 10-24 | $33.92 | 15% off |
| 25-49 | $30.32 | 24% off |
| 50-99 | $27.13 | 32% off |
| 100+ | $23.94 | 40% off |
Product details
Why use an off-wall projecting sign
A flat sign is most visible when viewed front-on. This folded double-faced format projects from the wall so the FIRE EXTINGUISHER legend can be recognised from both directions along a corridor, aisle or circulation route. It is useful where shelving, doorways or the direction of travel make a flat face less conspicuous.
Verified catalogue construction
The supplied format is one folded 1.6 mm polypropylene sign with two 225 × 225 mm printed faces. The material and dimensions come directly from the USS 2023 catalogue entry for the extracted artwork. No alternative size, flat substrate or reflective finish is represented on this page.
Placement and visibility
Position the sign above or adjacent to the matching extinguisher, maintain a clear approach view and avoid locations where doors, shelving or stored goods will conceal either face. Fire and Rescue NSW guidance gives a minimum sign height of 2 metres above floor level and says the sign should be apparent on approach. Confirm the final installation against the applicable fire-safety schedule and AS 2444 requirements.
Signage is one part of the fire-safety system
This product identifies the equipment location but does not select the extinguisher, provide the equipment bracket or replace inspection and maintenance. A responsible fire-safety professional should confirm the extinguisher type, distribution, mounting, access and location signage for the premises.
Check the sign format before ordering
This product is a projecting fire extinguisher location sign. Fire and Rescue NSW guidance says extinguisher signs should be above or adjacent to the equipment, mounted at least 2 metres above floor level and visible on approach. The correct extinguisher, location, sign arrangement and maintenance depend on the building or workplace requirements and AS 2444; the sign alone does not certify an installation.
- Fire and Rescue NSW – Portable fire extinguisher information for business — FRNSW guidance covers extinguisher access, mounting and location signage, including a minimum sign height of 2 metres, approach visibility and placement above or adjacent to the extinguisher. Read source (opens in a new tab)NSW guidance; confirm the applicable building, workplace and jurisdictional requirements for the installation.
- Safe Work Australia – Managing the work environment and facilities — The model Code of Practice identifies fire protection equipment, emergency planning, equipment maintenance and site-plan information as related parts of workplace emergency arrangements. Read source (opens in a new tab)Model Code of Practice; check adoption and variations in the relevant jurisdiction.
Before ordering
- Confirm that the supplied 225 × 225 mm double-faced projecting format suits the intended approach directions.
- Confirm that 1.6 mm polypropylene is suitable for the indoor or sheltered installation environment.
- Confirm the sign can be mounted above or adjacent to the matching extinguisher without obstructing access or creating a head-strike hazard.
- Confirm the equipment location and signage arrangement with the building's fire-safety schedule or responsible fire-safety professional.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Product guidance reviewed by Platinum Signs product and editorial team. Last reviewed: .
Material options
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Indicative durability: Medium-term use; site conditions apply · Typical use: Warehouses, factories, permanent indoor/outdoor
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 225 x 225mm | Multi-direction approach | Projecting fire-equipment location signs |
Specifications
| Product code | PS-FIR015 |
|---|---|
| Selected SKU | PS-FIR015-225X225-PP16-3D |
| Product | Fire Extinguisher Sign – 3D Projecting 225 × 225 mm |
| Category | Fire Signs |
| Format guidance | Double-faced 225 × 225 mm projecting fire-equipment location sign for indoor or sheltered installation |
| Printing | UV direct print |
| Selected material | Polypropylene (1.6mm) |
| Selected size | 225 x 225mm (Projecting) |
| Indicative durability | Medium-term use; site conditions apply |
| Indicative viewing distance | Multi-direction approach |
| Available sizes | 225 x 225mm (Projecting) |
| Available materials | Polypropylene (1.6mm) |
Selected specifications update with the material and size controls above.
Frequently asked questions
What is a projecting fire extinguisher sign?
It is a double-faced polypropylene sign folded into an off-wall V shape. The two printed faces can be seen from opposite directions along a corridor, aisle or open work area, helping people locate the extinguisher when a flat wall sign would be harder to see from the side.
What size and material is supplied?
This stocked product has two 225 × 225 mm printed faces and is made from folded 1.6 mm polypropylene. It is an indoor and sheltered-location product; it is not offered here as a flat vinyl, Corflute, Colorbond or aluminium sign.
Where should the sign be installed?
Install it above or adjacent to the matching extinguisher where both projecting faces remain conspicuous on the normal approaches. Fire and Rescue NSW guidance states that extinguisher location signs should be at least 2 metres above floor level and clearly visible on approach. The final location, height and sign arrangement must follow the building's fire-safety schedule and the applicable AS 2444 requirements.
Does this sign include the fire extinguisher?
No. This product is the projecting location sign only. The extinguisher, mounting bracket, inspection, maintenance and any fire-safety certification are separate.
Does buying this sign make the installation compliant?
No. The sign helps identify an extinguisher location, but compliance depends on the correct extinguisher selection, location, access, mounting, signage, maintenance and the requirements applying to the building or workplace. Confirm the installation with the responsible fire-safety professional or building practitioner.
What volume discounts apply?
Automatic volume pricing is 5–9 signs: 8% off, 10–24 signs: 15% off, 25–49 signs: 24% off, 50–99 signs: 32% off, 100+ signs: 40% off. The configurator is the source of truth and updates the unit price as quantity changes.
