Fire Alarm Call Point Sign
Product code: PSS-FIR-010
Direct occupants to the manual fire alarm call point with a clear, standards-compliant sign. AS 1319 requires identification of fire alarm activation points in all buildings; this sign ensures everyone can locate and operate the alarm system in an emergency.
Material
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
Includes $2.45 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $27.00 | — |
| 5-9 | $24.84 | 8% off |
| 10-24 | $22.95 | 15% off |
| 25-49 | $20.52 | 24% off |
| 50-99 | $18.36 | 32% off |
| 100+ | $16.20 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $27.00 | — |
| 5-9 | $24.84 | 8% off |
| 10-24 | $22.95 | 15% off |
| 25-49 | $20.52 | 24% off |
| 50-99 | $18.36 | 32% off |
| 100+ | $16.20 | 40% off |
Product details
Direct occupants to the manual fire alarm call point with a clear, standards-compliant sign. AS 1319 requires identification of fire alarm activation points in all buildings; this sign ensures everyone can locate and operate the alarm system in an emergency.
Supplied in corflute, polypropylene, Colorbond, and vinyl across sizes 225×300 mm to 450×600 mm. Pre-drilled holes and lamination options simplify installation and extend service life. Trade accounts receive bulk discounts and benefit from Platinum Signs' 5–7 day Australia-wide delivery.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Lightweight corrugated plastic board. Easy to fix to fences, hoarding, and temporary structures.
Indicative durability: Temporary use; exposure and installation affect service life · Typical use: Construction sites, temporary signage, events
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Indicative durability: Medium-term use; site conditions apply · Typical use: Warehouses, factories, permanent indoor/outdoor
Rigid coated sheet steel suited to demanding indoor and outdoor installations. Print life depends on finish, exposure, edges and mounting.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent installations, harsh environments
Peel-and-stick vinyl for smooth surfaces. Walls, doors, machinery, and equipment labelling.
Indicative durability: Short- to medium-term use; surface and exposure affect service life · Typical use: Indoor walls, equipment labels, smooth surfaces
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 225 x 300mm | Up to 5m | Indoor, close range |
| 300 x 450mm | Up to 10m | Standard indoor/outdoor |
| 450 x 600mm | Up to 15m | Outdoor, site entrances |
Optional finishes
Pre-drilled Holes (4 corners)
4 pre-drilled mounting holes in each corner for easy screw or cable-tie installation.
Available with rigid materials only.
Lamination
Clear protective overlaminate for added UV and scratch resistance. Service life still depends on the print, exposure, cleaning and installation.
Available with vinyl or aluminium only.
Specifications
| Product code | PSS-FIR-010 |
|---|---|
| Product | Fire Alarm Call Point Sign |
| Category | Fire Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Polypropylene (1.6mm) |
| Selected size | 225 x 300mm (Small) |
| Indicative durability | Medium-term use; site conditions apply |
| Indicative viewing distance | Up to 5m |
| Available sizes | 225 x 300mm (Small), 300 x 450mm (Medium), 450 x 600mm (Large) |
| Available materials | Corflute (5mm), Polypropylene (1.6mm), Colorbond Steel (0.6mm), Self-Adhesive Vinyl (Sticker) |
Selected specifications update with the material and size controls above.
Frequently asked questions
What does AS 1319 require for fire alarm signage?
AS 1319 mandates clear, visible identification of manual fire alarm activation points using standardised symbols and colours. The sign must be positioned at the call point itself.
How high should I mount the sign above the alarm?
Position it directly above the call point at a height that's clearly visible to approaching occupants—typically 1.2–1.5 metres from floor level, depending on your building layout.
What's the difference between materials for indoor vs. outdoor alarms?
Indoor alarms suit any material; outdoor installations benefit from Colorbond or vinyl, which resist weather and UV. Lamination adds protection if using corflute or polypropylene outdoors.
Can I order signs for multiple alarm points?
Yes, bulk orders are common. Provide a count of alarms and sizes, and we'll apply trade discounts and coordinate delivery to all locations.
How do I ensure the sign stays visible over time?
Choose vinyl or Colorbond for longevity; lamination protects plastic materials. All signs are maintenance-free, but periodic cleaning keeps them bright and legible.
