Emergency Stop Type B Sign
Product code: PSS-WH-FIR-0007
The Emergency Stop Type B sign meets AS 1319 requirements for fire safety identification, using a distinctive red panel that commands attention in emergency situations. Install it directly above or beside emergency equipment—extinguishers, hose reels, hydrants, or alarm activation points—to ensure occupants locate critical safety devices without delay.
Material
Lightweight corrugated plastic board. Easy to fix to fences, hoarding, and temporary structures.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
This configuration is temporarily unavailable. Choose another material or size, or contact us for help.
Open printable data sheet in a new tabProduct details
The Emergency Stop Type B sign meets AS 1319 requirements for fire safety identification, using a distinctive red panel that commands attention in emergency situations. Install it directly above or beside emergency equipment—extinguishers, hose reels, hydrants, or alarm activation points—to ensure occupants locate critical safety devices without delay.
Available in four durable substrates: Colorbond (non-combustible aluminium composite for high-risk environments), polypropylene (cost-effective indoor use), corflute (lightweight, weather-resistant), and vinyl (flexible application). Sizes range from 225×300 mm to 600×900 mm. All versions feature fade-resistant printing and optional reflective Class 1 or Class 2 finishes for low-light visibility.
Trade accounts receive bulk pricing on mixed orders. We deliver Australia-wide within 5–7 business days and can pre-drill mounting holes or add lamination protection upon request.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|
Specifications
| Product code | PSS-WH-FIR-0007 |
|---|---|
| Product | Emergency Stop Type B Sign |
| Category | Fire Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Corflute (5mm) |
| Selected size | 225 x 300,300mm |
| Indicative durability | Temporary use; exposure and installation affect service life |
| Indicative viewing distance | Confirm for the site |
| Available sizes | |
| Available materials |
Selected specifications update with the material and size controls above.
Frequently asked questions
Does this sign comply with Australian fire safety standards?
The appropriate safety-sign category, wording, placement and supporting controls depend on the product purpose, site risk and applicable jurisdiction. Confirm the requirement with your WHS adviser or regulator; a sign alone does not discharge WHS duties.
Which substrate is best for outdoor fire equipment?
Colorbond is the strongest choice for outdoor or high-temperature areas because it is non-combustible and resists UV degradation over time. Corflute is a lighter, weather-resistant alternative if budget is a priority.
Can I add reflective finish to improve night visibility?
Reflective grades provide different visibility performance. Choose the grade required by the project specification and site conditions, and confirm any road, traffic or high-risk requirement with the relevant authority before ordering.
What bulk discounts apply to trade accounts?
Automatic volume pricing is 5–9 signs: 8% off, 10–24 signs: 15% off, 25–49 signs: 24% off, 50–99 signs: 32% off, 100+ signs: 40% off. The configurator is the source of truth and updates the unit price as quantity changes.
Can you pre-drill mounting holes?
Yes. Four-corner pre-drilled holes are available as an optional extra. The configurator shows the current surcharge for the selected material and size before checkout.
