Do Not Use Lifts If There Is a Fire Sign
Product code: PSS-FIR-003
Lift evacuation rules are non-negotiable in a fire emergency—this sign communicates the danger clearly and complies with AS 1319 fire safety standards. The red panel format ensures visibility in low-light conditions and panic situations. Essential for office towers, shopping centres, and residential buildings with multiple levels.
Material
Lightweight corrugated plastic board. Easy to fix to fences, hoarding, and temporary structures.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
This configuration is temporarily unavailable. Choose another material or size, or contact us for help.
Open printable data sheet in a new tabProduct details
Lift evacuation rules are non-negotiable in a fire emergency—this sign communicates the danger clearly and complies with AS 1319 fire safety standards. The red panel format ensures visibility in low-light conditions and panic situations. Essential for office towers, shopping centres, and residential buildings with multiple levels.
Supplied in corflute, polypropylene, colorbond, and vinyl in four standard sizes (225×300 mm to 600×900 mm). Colorbond resists heat and corrosion; polypropylene suits sheltered indoor locations. Fire-resistant inks maintain colour and legibility over years of exposure. Trade accounts and bulk orders attract discounted pricing; delivery to any Australian address in 5–7 days.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|
Specifications
| Product code | PSS-FIR-003 |
|---|---|
| Product | Do Not Use Lifts If There Is a Fire Sign |
| Category | Fire Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Corflute (5mm) |
| Selected size | 225 x 300,300mm |
| Indicative durability | Temporary use; exposure and installation affect service life |
| Indicative viewing distance | Confirm for the site |
| Available sizes | |
| Available materials |
Selected specifications update with the material and size controls above.
Frequently asked questions
What's the best location for a lift evacuation sign?
Mount it on or immediately beside the lift doors at eye level, and at the top of stairwells where people might be tempted to return to the lifts. Repeat the sign on each floor in multi-level buildings.
Will polypropylene fade in a busy lobby?
Polypropylene holds colour well indoors, but high sunlight exposure over 3–5 years may cause slight fading. Colorbond is more resistant and better for ground-floor or naturally lit lobbies.
Do you offer reflective versions for low-light areas?
Reflective grades provide different visibility performance. Choose the grade required by the project specification and site conditions, and confirm any road, traffic or high-risk requirement with the relevant authority before ordering.
Can I laminate these signs for extra durability?
Lamination is an optional extra that protects against moisture, graffiti, and minor impact damage. Recommended for high-traffic or damp areas.
What discounts apply to multiple-building orders?
Automatic volume pricing is 5–9 signs: 8% off, 10–24 signs: 15% off, 25–49 signs: 24% off, 50–99 signs: 32% off, 100+ signs: 40% off. The configurator is the source of truth and updates the unit price as quantity changes.
