Custom 3-sided and 4-sided covers for existing bollards, available in weather-resistant corrugated plastic or short-term indoor E-flute cardboard. Every face is printed in full colour, and each cover is supplied flat with a hollow, open top for quick assembly on site.
Your Price
Minimum product value applied.
No payment required until your proof is approved
Our custom printed bollard signs are free-standing branded markers built for carparks, retail entries, footpaths, events, construction sites and indoor wayfinding. Choose between weather-resistant 3mm corrugated plastic, smooth white clay-coated cardboard, or natural kraft cardboard. Each material is available in 3-sided and 4-sided constructions with full-colour printing on every face.
The printed cover is supplied flat. Fold it to shape, connect the die-cut tabs and slots, then slide the hollow, open-top cover over your existing bollard. The assembled cover uses no separate hardware parts.
Bollard signs are the go-to choice for shopping centres, multi-storey carparks, retail strips, sporting venues, trade shows, exhibitions, polling places, construction sites and any business needing a freestanding branded marker without ground penetration. Place them at entrances, in queues, around hazards, or at any point where you'd otherwise need a temporary fixed sign.
Product gallery — rotates through bollard sign examples. Click to enlarge.
Bollard signs are the most flexible free-standing branded marker for Australian businesses — no ground anchoring, no power, no installer required. Whether you need carpark wayfinding, retail footpath signage, event activations, or construction site safety markers, our 3-sided and 4-sided corrugated-plastic and cardboard covers suit both outdoor and indoor campaigns. Below: where each material works best, sizing guidance, and how we compare to alternatives like A-frames and pull-up banners.
Direct drivers to entry, exit, accessible bays and EV chargers without ground penetration.
Capture foot traffic with eye-level branding right at your shopfront door.
Pop-up branded markers for festivals, sporting events, exhibitions and product launches.
High-visibility barrier markers for site induction zones, hazard areas and traffic control.
Order queues at venues, polling places, COVID screening points and box-office lines.
Lightweight cardboard bollards for trade shows, conferences and short-run promotions.
Weather-resistant corrugated plastic for 3-sided or 4-sided covers. Full-colour printing is included on every face, and the hollow cover slides over an existing bollard.
White clay-coated corrugated cardboard for short-term indoor promotions, events and wayfinding. It is not waterproof and should be kept dry.
Natural kraft corrugated cardboard with the same 3-sided and 4-sided size range as the white cardboard option, suited to short-term indoor campaigns.
| Size | Type | Best For |
|---|---|---|
| 270mm faces × 800, 1000 or 1800mm high | 3-sided corrugated plastic | Compact markers through to full-height carpark and retail wayfinding. |
| 300mm faces × 1000 or 1800mm high | 3-sided corrugated plastic | Wider triangular covers for larger existing bollards. |
| 155 or 175mm faces × 1000 or 1800mm high | 4-sided corrugated plastic | Square covers with four printed faces for multi-direction viewing. |
| 270 or 300mm faces × 800, 1000 or 1200mm high | 3-sided white or kraft cardboard | Indoor promotions, events and short-term wayfinding. |
| 155 or 175mm faces × 800, 1000 or 1200mm high | 4-sided white or kraft cardboard | Compact indoor displays with full-colour printing on four faces. |
| Feature | Bollard Signs | A-Frame Signs | Pull-Up Banners | Sandwich Boards |
|---|---|---|---|---|
| Outdoor use | Yes (corrugated plastic) | Yes | Limited (wind risk) | Yes |
| Visible directions | 3 or 4 sides | 2 sides | 1 side | 2 sides |
| Message swap | Replace or reorder the complete cover | Corflute insert swap | Replace whole banner | Wipe / chalk |
| Lifespan outdoors | About 1 year in continuous direct UV | 3–5+ years (Colorbond) | Indoor only | 3+ years |
| Setup | Fold, connect tabs and slide over bollard | Unfold | Pull up + clip | Unfold |
| Best for | Wayfinding, queues, 360° messaging | Footpath promos, cafe specials | Trade-show booths, indoor | Daily-changing menu boards |
The printed cover is supplied flat. Fold it to shape, connect the die-cut tabs and slots, then slide the cover over an existing bollard. The top remains hollow and open, and no separate hardware is required.
A 3-sided cover forms a triangle and provides three printed faces. A 4-sided cover forms a square and provides four printed faces for messaging from every direction.
Choose 3mm corrugated plastic for weather-resistant outdoor use. Choose 1.6mm white clay coat or kraft E-flute cardboard for short-term indoor displays; cardboard is not waterproof.
Service life depends on handling and UV exposure. In continuous direct sunlight, expect approximately one year; protected from direct UV, the cover can last longer. Cardboard covers should remain indoors and dry.
The maximum fit is 156mm for a 3-sided cover with 270mm faces, 173mm for a 3-sided cover with 300mm faces, 155mm for a 4-sided cover with 155mm faces, and 175mm for a 4-sided cover with 175mm faces.
Yes. Full-colour printing is included on all three or all four faces, depending on the construction selected.
Yes. Choose up to one design per ordered cover. Multiple designs share the order's volume rate and may add an artwork setup charge shown in the quote.
Supply a print-ready PDF in CMYK at 100% scale with 2mm bleed. Convert fonts to outlines, embed all images and keep bitmap artwork at or above 130 DPI at finished size. You can also start from our Canva template or request design assistance.
Production timing is confirmed after artwork approval. Delivery time is additional and depends on destination.
This online product uses the fixed sizes shown in the configurator. Contact us before ordering if your existing bollard does not fit one of the available face widths and heights.
You can configure from one unit. The quote applies the product's minimum order value and will show the correct total for the selected material, size and quantity.
Double-sided sandwich boards for footpaths and cafe entries.
Reserved, visitor and accessible bay markers — post or wall mount.
Tall fabric flags on poles — eye-catching for events and storefronts.
Lightweight corrugated plastic signs for site fences and short-term display.
Looking for custom bollard signs in Sydney or anywhere across Australia? Platinum Signs supplies full-colour corrugated-plastic and cardboard bollard covers in the complete online size range. Contact us for help planning multiple designs, large quantities or a branded fleet rollout.
