Slippery Surface Sign
Product code: PSS-WH-CAU-0043
The Slippery Surface warning sign uses the AS 1319 yellow and black format to alert workers to fall hazards in wet, icy, or low-friction areas. Essential for kitchens, bathrooms, loading docks, car parks, and outdoor walkways during wet weather, the sign gives personnel time to adjust their pace and footwear before entering the hazard zone.
Material
Lightweight corrugated plastic board. Easy to fix to fences, hoarding, and temporary structures.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
This configuration is temporarily unavailable. Choose another material or size, or contact us for help.
Open printable data sheet in a new tabProduct details
The Slippery Surface warning sign uses the AS 1319 yellow and black format to alert workers to fall hazards in wet, icy, or low-friction areas. Essential for kitchens, bathrooms, loading docks, car parks, and outdoor walkways during wet weather, the sign gives personnel time to adjust their pace and footwear before entering the hazard zone.
Available in corflute, polypropylene, Colorbond steel, and vinyl across four sizes, the sign is printed with UV-resistant inks that withstand Australian sun and moisture exposure. Enhance visibility with reflective Class 1 or 2 striping for night-time or dimly lit areas, lamination for splash protection, or pre-drilled holes for quick mounting.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|
Specifications
| Product code | PSS-WH-CAU-0043 |
|---|---|
| Product | Slippery Surface Sign |
| Category | Warning Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Corflute (5mm) |
| Selected size | 225 x 300,300mm |
| Indicative durability | Temporary use; exposure and installation affect service life |
| Indicative viewing distance | Confirm for the site |
| Available sizes | |
| Available materials |
Selected specifications update with the material and size controls above.
Frequently asked questions
When should I use a Slippery Surface sign?
Use in wet areas like kitchens and bathrooms, loading docks after rain, car parks, outdoor walkways, and near swimming pools or water features. Also deploy temporarily during cleaning or maintenance when floors are wet.
Which material is best for wet environments?
Vinyl or Colorbond steel resist moisture and won't delaminate. Polypropylene is also water-resistant but less durable long-term. Add lamination for extra protection if the sign will face direct spray or submersion.
Should I use reflective striping for outdoor car parks?
Reflective grades provide different visibility performance. Choose the grade required by the project specification and site conditions, and confirm any road, traffic or high-risk requirement with the relevant authority before ordering.
Can I move the sign to different locations?
Yes. Corflute or polypropylene with pre-drilled holes are easy to relocate. If you need a temporary solution, consider a corflute sign; for permanent outdoor installation, Colorbond or reflective vinyl is more robust.
Do you offer bulk pricing for multi-site orders?
Automatic volume pricing is 5–9 signs: 8% off, 10–24 signs: 15% off, 25–49 signs: 24% off, 50–99 signs: 32% off, 100+ signs: 40% off. The configurator is the source of truth and updates the unit price as quantity changes.
