Laser Sign – LASER BEAM Warning
Product code: PS-WAR029
Mark a confirmed laser-beam hazard with the exact yellow-and-black face shown. Match this general warning to the documented laser class, labels and site controls before ordering.
Material
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
Includes $2.45 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $27.00 | — |
| 5-9 | $24.84 | 8% off |
| 10-24 | $22.95 | 15% off |
| 25-49 | $20.52 | 24% off |
| 50-99 | $18.36 | 32% off |
| 100+ | $16.20 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $27.00 | — |
| 5-9 | $24.84 | 8% off |
| 10-24 | $22.95 | 15% off |
| 25-49 | $20.52 | 24% off |
| 50-99 | $18.36 | 32% off |
| 100+ | $16.20 | 40% off |
Product details
Confirm the exact LASER BEAM face
The portrait artwork shows a black laser-radiation burst and horizontal beam inside a warning triangle above the exact legend LASER BEAM on yellow. It does not include a class, wavelength, output, exposure instruction or aperture wording. Compare the visible face with the approved sign schedule rather than treating different laser labels as interchangeable.
Identify the laser class first
ARPANSA explains that laser hazards differ across eight classifications. Establish the equipment class and accessible-emission information from the manufacturer's label and project documentation before ordering. This generic face does not identify Class 1, 1M, 1C, 2, 2M, 3R, 3B or 4.
Plan placement from the assessed layout
Identify equipment, controlled-area entrances, operating positions, beam paths and locations where radiation could become accessible during use or maintenance. Position the selected warning where it can be read before exposure, keep the complete face visible and do not cover the manufacturer's classification, explanatory or aperture labels. No universal mounting height or spacing is claimed.
Keep the sign within the full control system
A warning sign communicates information but does not control laser radiation at its source. Confirm enclosures, guards, interlocks, shielding, shutters, beam stops, access restrictions, procedures, training, supervision, PPE and emergency arrangements through the site assessment and competent laser-safety advice. Jurisdiction- and application-specific requirements may also apply.
Check the sign format before ordering
This is a generic LASER BEAM warning face, not a complete laser equipment label or certified control measure. It does not identify the laser class, wavelength, output, aperture or required exposure instruction. Confirm the equipment labels, area signage, risk controls and jurisdictional requirements for the actual laser system.
- ARPANSA – Lasers — ARPANSA describes eight laser classifications and explains that eye, skin, reflection and fire hazards differ by class. The classification is used to develop safety control measures. Read source (opens in a new tab)Hazard guidance only. It does not certify this artwork, material, dimensions, finish or placement.
- ARPANSA – Laser hazards and safety — ARPANSA says Australian laser hazard labelling includes the laser class, power output and wavelength and advises users to pay close attention to hazard labels. Read source (opens in a new tab)This face contains none of those device-specific details and is not represented as a substitute for them.
- Queensland Health – Labels for laser equipment — Queensland Health distinguishes warning, explanatory and aperture labels, says the required information depends on laser class and states that equipment labels must be durable, permanently fixed, legible and visible without exposure. Read source (opens in a new tab)Queensland equipment-labelling guidance, not approval of this general area-warning face or a statement of every jurisdiction's requirements.
Before ordering
- Confirm the laser class, wavelength, output and accessible-emission information from the equipment documentation.
- Check whether the project requires a general area warning, class label, explanatory label, aperture label or a combination.
- Map equipment, controlled-area entrances, beam paths, maintenance access and every approach requiring advance warning.
- Select the portrait size, material, finish and fixing method without obscuring equipment labels, controls or interlocks.
- Verify engineering controls, access arrangements, procedures, training, PPE and jurisdictional requirements separately.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Product guidance reviewed by Platinum Signs product and editorial team. Last reviewed: .
Material options
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Indicative durability: Medium-term use; site conditions apply · Typical use: Warehouses, factories, permanent indoor/outdoor
Peel-and-stick vinyl for smooth surfaces. Walls, doors, machinery, and equipment labelling.
Indicative durability: Short- to medium-term use; surface and exposure affect service life · Typical use: Indoor walls, equipment labels, smooth surfaces
Lightweight corrugated plastic board. Easy to fix to fences, hoarding, and temporary structures.
Indicative durability: Temporary use; exposure and installation affect service life · Typical use: Construction sites, temporary signage, events
Rigid coated sheet steel suited to demanding indoor and outdoor installations. Print life depends on finish, exposure, edges and mounting.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent installations, harsh environments
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 225 x 300mm | Up to 5m | Indoor, close range |
| 300 x 450mm | Up to 10m | Standard indoor/outdoor |
| 450 x 600mm | Up to 15m | Outdoor, site entrances |
Optional finishes
Pre-drilled Holes (4 corners)
4 pre-drilled mounting holes in each corner for easy screw or cable-tie installation.
Available with rigid materials only.
Lamination
Clear protective overlaminate for added UV and scratch resistance. Service life still depends on the print, exposure, cleaning and installation.
Available with vinyl or aluminium only.
Reflective Class 1 (High Intensity)
High-intensity prismatic reflective film. Confirm the grade required by the project specification and relevant authority.
Available with vinyl or aluminium only.
Reflective Class 2 (Engineer Grade)
Engineer-grade reflective film for general site visibility. Confirm suitability for the lighting, approach distance and project specification.
Available with vinyl or aluminium only.
Specifications
| Product code | PS-WAR029 |
|---|---|
| Selected SKU | PS-WAR029-225X300-PP16 |
| Product | Laser Sign – LASER BEAM Warning |
| Category | Warning Signs |
| Format guidance | Yellow portrait warning face with black rounded double border, laser-radiation symbol and LASER BEAM legend; no class, wavelength, output or aperture wording |
| Printing | UV direct print |
| Selected material | Polypropylene (1.6mm) |
| Selected size | 225 x 300mm (Small) |
| Indicative durability | Medium-term use; site conditions apply |
| Indicative viewing distance | Up to 5m |
| Available sizes | 225 x 300mm (Small), 300 x 450mm (Medium), 450 x 600mm (Large) |
| Available materials | Polypropylene (1.6mm), Self-Adhesive Vinyl (Sticker), Corflute (3mm), Colorbond Steel (0.6mm) |
Selected specifications update with the material and size controls above.
Frequently asked questions
What is printed on this Laser sign?
The approved portrait artwork has a yellow field, black rounded double border, a black warning triangle with a laser-radiation burst and horizontal beam, and the exact two-line legend LASER BEAM. It has no laser class, wavelength, power output, aperture wording, access restriction or eye-protection instruction.
Can this sign replace the labels required on laser equipment?
No. Queensland Health explains that laser equipment labels depend on the device class and include warning, explanatory and aperture labels placed on the equipment. This generic LASER BEAM face does not provide that class- and device-specific information and is not represented as an equipment label.
Which laser class does this sign cover?
The face does not identify a class. ARPANSA describes eight laser classes with different eye, skin, reflection and fire hazards, so do not treat this sign as suitable for every laser or infer a class from the symbol. Confirm the equipment classification and required wording before ordering.
Where should a Laser Beam warning sign be positioned?
Use the documented laser risk assessment, equipment instructions and applicable premises requirements to identify controlled-area entrances and other approaches where a general warning is required. Keep the complete face visible before exposure could occur. The product page does not prescribe a universal mounting height or replace an illuminated warning, interlock or access control.
Which size, material and finish should I choose?
The portrait sizes are 225 × 300 mm, 300 × 450 mm and 450 × 600 mm. Polypropylene is the default rigid option; self-adhesive vinyl is supplied in packs of three for a clean smooth substrate, 3 mm Corflute suits temporary use and Colorbond steel suits a stronger fixed face. Optional holes apply only to rigid materials, while lamination and reflective film apply only to compatible vinyl selections.
What volume discounts apply?
Automatic volume pricing is 5–9 signs: 8% off, 10–24 signs: 15% off, 25–49 signs: 24% off, 50–99 signs: 32% off, 100+ signs: 40% off. The configurator is the source of truth and updates the unit price as quantity changes.
