Caution Watch Your Step Sign
Product code: PSS-WH-CAU-0063
Prevent trips and falls with this AS 1319-compliant caution sign alerting workers to uneven surfaces, stairs, and obstacles. The yellow and black warning format is instantly recognised across Australian workplaces, signalling a non-critical but important hazard.
Material
Lightweight corrugated plastic board. Easy to fix to fences, hoarding, and temporary structures.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
This configuration is temporarily unavailable. Choose another material or size, or contact us for help.
Open printable data sheet in a new tabProduct details
Prevent trips and falls with this AS 1319-compliant caution sign alerting workers to uneven surfaces, stairs, and obstacles. The yellow and black warning format is instantly recognised across Australian workplaces, signalling a non-critical but important hazard.
Offered in corflute, polypropylene, colorbond, and vinyl in four sizes: 225×300 mm, 300×450 mm, 450×600 mm, and 600×900 mm. Select reflective Class 1 or Class 2 for stairwells and dimly lit areas, lamination for long-term protection, or pre-drilled holes for quick installation.
Trade customers receive bulk discounts on volume purchases. Nationwide delivery is available. All materials are UV-stabilised to resist fading and maintain legibility in outdoor and high-temperature conditions.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|
Specifications
| Product code | PSS-WH-CAU-0063 |
|---|---|
| Product | Caution Watch Your Step Sign |
| Category | Warning Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Corflute (5mm) |
| Selected size | 225 x 300,300mm |
| Indicative durability | Temporary use; exposure and installation affect service life |
| Indicative viewing distance | Confirm for the site |
| Available sizes | |
| Available materials |
Selected specifications update with the material and size controls above.
Frequently asked questions
What's the best placement for a step hazard sign?
Mount the sign at eye level (1.4–1.6 m) at the top and bottom of stairs or immediately before an uneven surface. Reflective versions are essential in stairwells with poor natural light.
Should I use reflective coating on interior office stairs?
Reflective grades provide different visibility performance. Choose the grade required by the project specification and site conditions, and confirm any road, traffic or high-risk requirement with the relevant authority before ordering.
Which material suits a wet or slippery floor area?
Vinyl or colorbond are preferred in wet areas because they resist moisture and won't delaminate. Polypropylene is acceptable in semi-sheltered zones but may absorb water over time.
Can I use this sign for outdoor garden steps or pathways?
Yes. Use colorbond or vinyl in 450×600 mm or larger for outdoor visibility. Lamination and reflective coating are recommended to withstand weather and ensure visibility at dusk.
Do you supply matching sets for multiple stairwells?
Certainly. Order multiple signs in the same size and finish for consistency. Trade accounts can arrange tiered pricing and single-shipment delivery across your facility.
