Danger Keep Hands Clear Type A Sign
Product code: PSS-WH-DAN-0035
Prevent hand injuries on machinery and equipment with this AS 1319–compliant danger sign. The red header and white 'DANGER' text communicate the immediate threat, meeting Australian standards for hazard visibility at point of entry.
Material
Lightweight corrugated plastic board. Easy to fix to fences, hoarding, and temporary structures.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
This configuration is temporarily unavailable. Choose another material or size, or contact us for help.
Open printable data sheet in a new tabProduct details
Prevent hand injuries on machinery and equipment with this AS 1319–compliant danger sign. The red header and white 'DANGER' text communicate the immediate threat, meeting Australian standards for hazard visibility at point of entry.
Available in corflute, polypropylene, Colorbond, and vinyl; four sizes from 225×300 mm to 600×900 mm fit diverse machine configurations. Reflective Class 1 and Class 2 finishes enhance recognition in low-light workshops. Lamination resists abrasion and moisture on high-traffic machinery.
Trade accounts receive volume discounts. Australia-wide delivery within 5–7 business days. Mounting holes are pre-drilled.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|
Specifications
| Product code | PSS-WH-DAN-0035 |
|---|---|
| Product | Danger Keep Hands Clear Type A Sign |
| Category | Danger Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Corflute (5mm) |
| Selected size | 225 x 300,300mm |
| Indicative durability | Temporary use; exposure and installation affect service life |
| Indicative viewing distance | Confirm for the site |
| Available sizes | |
| Available materials |
Selected specifications update with the material and size controls above.
Frequently asked questions
What is the difference between Type A and other hand-hazard signs?
Type A is the standard configuration for general hand-pinch hazards on machinery. Consult AS 1319 or contact our team if your application requires a different type.
Which material resists oil and grease best?
Vinyl and Colorbond resist oil and grease splashes and are easy to wipe clean. Polypropylene also performs well but may require more frequent cleaning.
Can I laminate just one side of the sign?
Standard lamination covers both sides for even protection. Single-sided lamination is available on request; contact sales for pricing.
How do I know if I need Class 2 reflective?
Reflective grades provide different visibility performance. Choose the grade required by the project specification and site conditions, and confirm any road, traffic or high-risk requirement with the relevant authority before ordering.
Do you offer custom text or pictograms?
This sign uses the standard AS 1319 pictogram and text. For custom messaging or branding, contact our design team to discuss options.
