Danger 6,600 Volts Sign
Product code: PSS-DAN-070
The Danger 6,600 Volts sign warns personnel of high-voltage electrical hazards in substations, switchyards, power distribution areas, and industrial electrical installations. Clear, high-contrast design ensures immediate recognition and compliance with workplace safety obligations.
Material
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
Includes $2.45 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $27.00 | — |
| 5-9 | $24.84 | 8% off |
| 10-24 | $22.95 | 15% off |
| 25-49 | $20.52 | 24% off |
| 50-99 | $18.36 | 32% off |
| 100+ | $16.20 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $27.00 | — |
| 5-9 | $24.84 | 8% off |
| 10-24 | $22.95 | 15% off |
| 25-49 | $20.52 | 24% off |
| 50-99 | $18.36 | 32% off |
| 100+ | $16.20 | 40% off |
Product details
The Danger 6,600 Volts sign warns personnel of high-voltage electrical hazards in substations, switchyards, power distribution areas, and industrial electrical installations. Clear, high-contrast design ensures immediate recognition and compliance with workplace safety obligations.
Manufactured from aluminium, polypropylene, Colorbond, or vinyl—each material suited to different environmental conditions and durability requirements. Four size options (225×300mm to 600×900mm) accommodate viewing distances from close-range work areas to larger outdoor installations. Add pre-drilled holes, lamination, or reflective finishes (Class 1 or Class 2) to enhance longevity and night-time visibility.
Platinum Signs serves electrical contractors, facility managers, and utilities with bulk ordering, customisation, and rapid Australia-wide delivery. Trade accounts welcome.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Rigid aluminium sheet suited to long-term signage where corrosion resistance and dimensional stability matter.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent outdoor installations and high-durability sites
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Indicative durability: Medium-term use; site conditions apply · Typical use: Warehouses, factories, permanent indoor/outdoor
Rigid coated sheet steel suited to demanding indoor and outdoor installations. Print life depends on finish, exposure, edges and mounting.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent installations, harsh environments
Peel-and-stick vinyl for smooth surfaces. Walls, doors, machinery, and equipment labelling.
Indicative durability: Short- to medium-term use; surface and exposure affect service life · Typical use: Indoor walls, equipment labels, smooth surfaces
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 225 x 300mm | Up to 5m | Indoor, close range |
| 300 x 450mm | Up to 10m | Standard indoor/outdoor |
| 450 x 600mm | Up to 15m | Outdoor, site entrances |
| 600 x 900mm | Up to 25m | Large sites, high visibility |
Optional finishes
Pre-drilled Holes (4 corners)
4 pre-drilled mounting holes in each corner for easy screw or cable-tie installation.
Available with rigid materials only.
Lamination
Clear protective overlaminate for added UV and scratch resistance. Service life still depends on the print, exposure, cleaning and installation.
Available with vinyl or aluminium only.
Reflective Class 1 (High Intensity)
High-intensity prismatic reflective film. Confirm the grade required by the project specification and relevant authority.
Available with vinyl or aluminium only.
Reflective Class 2 (Engineer Grade)
Engineer-grade reflective film for general site visibility. Confirm suitability for the lighting, approach distance and project specification.
Available with vinyl or aluminium only.
Specifications
| Product code | PSS-DAN-070 |
|---|---|
| Product | Danger 6,600 Volts Sign |
| Category | Danger Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Polypropylene (1.6mm) |
| Selected size | 225 x 300mm (Small) |
| Indicative durability | Medium-term use; site conditions apply |
| Indicative viewing distance | Up to 5m |
| Available sizes | 225 x 300mm (Small), 300 x 450mm (Medium), 450 x 600mm (Large), 600 x 900mm (Extra Large) |
| Available materials | Aluminium (1.6mm), Polypropylene (1.6mm), Colorbond Steel (0.6mm), Self-Adhesive Vinyl (Sticker) |
Selected specifications update with the material and size controls above.
Frequently asked questions
What Australian Standard applies to electrical hazard signs?
The appropriate safety-sign category, wording, placement and supporting controls depend on the product purpose, site risk and applicable jurisdiction. Confirm the requirement with your WHS adviser or regulator; a sign alone does not discharge WHS duties.
Which material is best for outdoor electrical installations?
Aluminium or Colorbond are ideal for outdoor exposure, as they resist corrosion and UV degradation. Polypropylene suits covered areas; vinyl is suitable for temporary applications.
Can I add lamination to protect the sign?
Yes, lamination adds a protective layer that extends the sign's lifespan and improves resistance to moisture, dirt, and minor physical damage. It's especially useful in harsh industrial environments.
What size should I choose for a substation fence?
Available sizes are 225 x 300mm (Small), 300 x 450mm (Medium), 450 x 600mm (Large), 600 x 900mm (Extra Large). Viewing-distance notes are a practical selection aid, not a substitute for checking the approach distance, lighting, mounting position, wording and site risk assessment.
Do pre-drilled holes affect the sign's integrity?
Yes. Four-corner pre-drilled holes are an optional extra with a base surcharge of $3.00 inc GST per sign for the listed configurations, before any applicable volume discount. Select the option to update the configured total before adding to cart.
How often should electrical hazard signs be replaced?
Inspect signs annually for fading, damage, or illegibility. Replace if the message is no longer clear or if reflective coating has deteriorated significantly—typically every 5–10 years depending on environment.
