Danger 22,000 Volts Keep Clear Sign
Product code: PSS-DAN-102
The Danger 22,000 Volts sign alerts workers and contractors to extreme high-voltage electrical hazards in transmission infrastructure, major substations, and utility distribution networks. Unambiguous design and bold warning messaging meet Australian electrical safety standards and workplace duty-of-care requirements.
Material
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
Includes $2.45 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $27.00 | — |
| 5-9 | $24.84 | 8% off |
| 10-24 | $22.95 | 15% off |
| 25-49 | $20.52 | 24% off |
| 50-99 | $18.36 | 32% off |
| 100+ | $16.20 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $27.00 | — |
| 5-9 | $24.84 | 8% off |
| 10-24 | $22.95 | 15% off |
| 25-49 | $20.52 | 24% off |
| 50-99 | $18.36 | 32% off |
| 100+ | $16.20 | 40% off |
Product details
The Danger 22,000 Volts sign alerts workers and contractors to extreme high-voltage electrical hazards in transmission infrastructure, major substations, and utility distribution networks. Unambiguous design and bold warning messaging meet Australian electrical safety standards and workplace duty-of-care requirements.
Available in aluminium, polypropylene, Colorbond, or vinyl with four size options (225×300mm to 600×900mm) to suit installation context. Customise with pre-drilled mounting holes, protective lamination, and Class 1 or Class 2 reflective finishes for enhanced durability and visibility in low-light conditions.
Platinum Signs supplies electrical utilities, transmission operators, and industrial contractors nationwide. Bulk pricing applies to volume orders; we manage custom finishing and coordinate delivery to remote or secure sites.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Rigid aluminium sheet suited to long-term signage where corrosion resistance and dimensional stability matter.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent outdoor installations and high-durability sites
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Indicative durability: Medium-term use; site conditions apply · Typical use: Warehouses, factories, permanent indoor/outdoor
Rigid coated sheet steel suited to demanding indoor and outdoor installations. Print life depends on finish, exposure, edges and mounting.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent installations, harsh environments
Peel-and-stick vinyl for smooth surfaces. Walls, doors, machinery, and equipment labelling.
Indicative durability: Short- to medium-term use; surface and exposure affect service life · Typical use: Indoor walls, equipment labels, smooth surfaces
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 225 x 300mm | Up to 5m | Indoor, close range |
| 300 x 450mm | Up to 10m | Standard indoor/outdoor |
| 450 x 600mm | Up to 15m | Outdoor, site entrances |
| 600 x 900mm | Up to 25m | Large sites, high visibility |
Optional finishes
Pre-drilled Holes (4 corners)
4 pre-drilled mounting holes in each corner for easy screw or cable-tie installation.
Available with rigid materials only.
Lamination
Clear protective overlaminate for added UV and scratch resistance. Service life still depends on the print, exposure, cleaning and installation.
Available with vinyl or aluminium only.
Reflective Class 1 (High Intensity)
High-intensity prismatic reflective film. Confirm the grade required by the project specification and relevant authority.
Available with vinyl or aluminium only.
Reflective Class 2 (Engineer Grade)
Engineer-grade reflective film for general site visibility. Confirm suitability for the lighting, approach distance and project specification.
Available with vinyl or aluminium only.
Specifications
| Product code | PSS-DAN-102 |
|---|---|
| Product | Danger 22,000 Volts Keep Clear Sign |
| Category | Danger Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Polypropylene (1.6mm) |
| Selected size | 225 x 300mm (Small) |
| Indicative durability | Medium-term use; site conditions apply |
| Indicative viewing distance | Up to 5m |
| Available sizes | 225 x 300mm (Small), 300 x 450mm (Medium), 450 x 600mm (Large), 600 x 900mm (Extra Large) |
| Available materials | Aluminium (1.6mm), Polypropylene (1.6mm), Colorbond Steel (0.6mm), Self-Adhesive Vinyl (Sticker) |
Selected specifications update with the material and size controls above.
Frequently asked questions
Is this sign compliant with electrical safety regulations?
Yes, the Danger 22,000 Volts sign is designed to meet AS 1319 and AS/NZS 1318 requirements for electrical hazard warnings, ensuring legal compliance across Australian electrical infrastructure.
What's the difference between 6,600V and 22,000V signage?
Both follow the same safety standard but communicate different voltage levels. Use the 22,000V sign only where that specific voltage is present; incorrect labelling can create legal and safety liability.
Should I laminate a sign in a transmission yard?
Yes, lamination is strongly recommended in outdoor transmission environments where exposure to dust, rain, UV, and temperature extremes can degrade unprotected materials over time.
Can I order signs with our company branding or contact details?
Standard designs comply with AS 1319 specifications. For custom text or branding, contact our team to discuss feasibility; additional costs and lead times may apply.
What reflectivity do I need for a night-lit substation?
Class 1 reflective is adequate if the area has consistent artificial lighting. Class 2 is recommended for areas with variable lighting or where signs may be viewed from vehicles at night.
How do I order in bulk for multiple sites?
Automatic volume pricing is 5–9 signs: 8% off, 10–24 signs: 15% off, 25–49 signs: 24% off, 50–99 signs: 32% off, 100+ signs: 40% off. The configurator is the source of truth and updates the unit price as quantity changes.
