Platinum Signs
Danger 6,600 Volts Sign
PSS-DAN-070 · Product data sheet
Data sheet
5 August 2026
https://www.platinumsigns.com.au
Description
The Danger 6,600 Volts sign warns personnel of high-voltage electrical hazards in substations, switchyards, power distribution areas, and industrial electrical installations. Clear, high-contrast design ensures immediate recognition and compliance with workplace safety obligations. Manufactured from aluminium, polypropylene, Colorbond, or vinyl—each material suited to different environmental conditions and durability requirements. Four size options (225×300mm to 600×900mm) accommodate viewing distances from close-range work areas to larger outdoor installations. Add pre-drilled holes, lamination, or reflective finishes (Class 1 or Class 2) to enhance longevity and night-time visibility. Platinum Signs serves electrical contractors, facility managers, and utilities with bulk ordering, customisation, and rapid Australia-wide delivery. Trade accounts welcome.
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
- Category
- Danger Signs
- Sign selection
- Confirm against site requirements
- Artwork
- Off-the-shelf design supplied as shown
- Product code
- PSS-DAN-070
Available materials
| Material | Specification |
|---|---|
| Aluminium (1.6mm) | Rigid aluminium sheet suited to long-term signage where corrosion resistance and dimensional stability matter. Indicative service life: Long-term substrate; print and site conditions apply. Typical use: Permanent outdoor installations and high-durability sites. |
| Polypropylene (1.6mm) | Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure. Indicative service life: Medium-term use; site conditions apply. Typical use: Warehouses, factories, permanent indoor/outdoor. |
| Colorbond Steel (0.6mm) | Rigid coated sheet steel suited to demanding indoor and outdoor installations. Print life depends on finish, exposure, edges and mounting. Indicative service life: Long-term substrate; print and site conditions apply. Typical use: Permanent installations, harsh environments. |
| Self-Adhesive Vinyl (Sticker) | Peel-and-stick vinyl for smooth surfaces. Walls, doors, machinery, and equipment labelling. Indicative service life: Short- to medium-term use; surface and exposure affect service life. Typical use: Indoor walls, equipment labels, smooth surfaces. |
Available sizes
- • 225 x 300mm (Small)
- • 300 x 450mm (Medium)
- • 450 x 600mm (Large)
- • 600 x 900mm (Extra Large)
Volume pricing — Polypropylene (1.6mm) · 225 x 300mm (Small) (inc. GST)
| Quantity | Unit price | Saving |
|---|---|---|
| 1-4 | $27.00 | — |
| 5-9 | $24.84 | -8% |
| 10-24 | $22.95 | -15% |
| 25-49 | $20.52 | -24% |
| 50-99 | $18.36 | -32% |
| 100+ | $16.20 | -40% |
Prices shown for the listed material/size combination. Full configuration pricing is available at https://www.platinumsigns.com.au/safety-signs/danger/danger-6600-volts.
Frequently asked
What Australian Standard applies to electrical hazard signs?
The appropriate safety-sign category, wording, placement and supporting controls depend on the product purpose, site risk and applicable jurisdiction. Confirm the requirement with your WHS adviser or regulator; a sign alone does not discharge WHS duties.
Which material is best for outdoor electrical installations?
Aluminium or Colorbond are ideal for outdoor exposure, as they resist corrosion and UV degradation. Polypropylene suits covered areas; vinyl is suitable for temporary applications.
Can I add lamination to protect the sign?
Yes, lamination adds a protective layer that extends the sign's lifespan and improves resistance to moisture, dirt, and minor physical damage. It's especially useful in harsh industrial environments.
What size should I choose for a substation fence?
Available sizes are 225 x 300mm (Small), 300 x 450mm (Medium), 450 x 600mm (Large), 600 x 900mm (Extra Large). Viewing-distance notes are a practical selection aid, not a substitute for checking the approach distance, lighting, mounting position, wording and site risk assessment.
Do pre-drilled holes affect the sign's integrity?
Yes. Four-corner pre-drilled holes are an optional extra with a base surcharge of $3.00 inc GST per sign for the listed configurations, before any applicable volume discount. Select the option to update the configured total before adding to cart.
How often should electrical hazard signs be replaced?
Inspect signs annually for fading, damage, or illegibility. Replace if the message is no longer clear or if reflective coating has deteriorated significantly—typically every 5–10 years depending on environment.