Danger Anhydrous Ammonia Sign
Product code: PSS-DAN-005
Warn workers of anhydrous ammonia risks with a sign that meets AS 1319 danger-level standards. The red header and white 'DANGER' text deliver an unmistakable alert to anyone approaching the hazard zone.
Material
Lightweight corrugated plastic board. Easy to fix to fences, hoarding, and temporary structures.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
This configuration is temporarily unavailable. Choose another material or size, or contact us for help.
Open printable data sheet in a new tabProduct details
Warn workers of anhydrous ammonia risks with a sign that meets AS 1319 danger-level standards. The red header and white 'DANGER' text deliver an unmistakable alert to anyone approaching the hazard zone.
Available in corflute, polypropylene, Colorbond steel, or vinyl across four standard sizes (225×300 mm to 600×900 mm). Add lamination for UV and moisture protection, or reflective Class 1/2 film for visibility in low-light or outdoor settings. Pre-drilled mounting holes are optional.
Platinum Signs supplies trade accounts with bulk discounts and Australia-wide delivery. Contact us for custom sizes, volume pricing, or advice on material selection for your site.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|
Specifications
| Product code | PSS-DAN-005 |
|---|---|
| Product | Danger Anhydrous Ammonia Sign |
| Category | Danger Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Corflute (5mm) |
| Selected size | 225 x 300,300mm |
| Indicative durability | Temporary use; exposure and installation affect service life |
| Indicative viewing distance | Confirm for the site |
| Available sizes | |
| Available materials |
Selected specifications update with the material and size controls above.
Frequently asked questions
Why use a dedicated anhydrous ammonia sign instead of a generic chemical hazard sign?
Specific hazard signs reinforce the exact danger and emergency response needed. Anhydrous ammonia poses unique risks (extreme cold, rapid evaporation, inhalation), so a dedicated sign is clearer and more effective.
Which material is best for outdoor ammonia storage?
Colorbond steel offers maximum durability in harsh weather and resists corrosion from ammonia vapour. Polypropylene is a lighter, cost-effective alternative with good chemical resistance.
Should I laminate a sign in a refrigerated facility?
Yes. Lamination prevents condensation from damaging the print and keeps the sign readable in cold, high-humidity conditions. Reflective film is also useful in low-light cold rooms.
How many signs do I need for a large storage facility?
Place one sign at each entry point to the hazard zone, plus additional signs if the area is large or has multiple work stations. We can advise on placement during consultation.
Do you offer a discount for ordering 20+ signs?
Automatic volume pricing is 5–9 signs: 8% off, 10–24 signs: 15% off, 25–49 signs: 24% off, 50–99 signs: 32% off, 100+ signs: 40% off. The configurator is the source of truth and updates the unit price as quantity changes.
