Security Badges Must Be Worn at All Times Sign
Product code: PSS-LC-WKP-0005
Restricted-area access-control notice with red header panel, used in secure commercial premises, data centres, pharmaceutical plants, and security-graded facilities. Reinforces the PCBU's WHS Act s19 duty and underpins the access-control element of ISO 27001 and other security standards. Placement at every entry point into restricted zones prevents visitors from claiming ignorance of security requirements.
Material
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
Includes $2.45 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $27.00 | — |
| 5-9 | $24.84 | 8% off |
| 10-24 | $22.95 | 15% off |
| 25-49 | $20.52 | 24% off |
| 50-99 | $18.36 | 32% off |
| 100+ | $16.20 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $27.00 | — |
| 5-9 | $24.84 | 8% off |
| 10-24 | $22.95 | 15% off |
| 25-49 | $20.52 | 24% off |
| 50-99 | $18.36 | 32% off |
| 100+ | $16.20 | 40% off |
Product details
Restricted-area access-control notice with red header panel, used in secure commercial premises, data centres, pharmaceutical plants, and security-graded facilities. Reinforces the PCBU's WHS Act s19 duty and underpins the access-control element of ISO 27001 and other security standards. Placement at every entry point into restricted zones prevents visitors from claiming ignorance of security requirements.
Available in Colorbond, polypropylene, aluminium, or vinyl in three sizes (225×300mm to 450×600mm). Optional Class 1 and 2 reflective finishes for night-time visibility. Platinum Signs supplies trade customers with bulk discounts, pre-drilled mounting holes, and laminated protection. Australia-wide delivery.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Rigid coated sheet steel suited to demanding indoor and outdoor installations. Print life depends on finish, exposure, edges and mounting.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent installations, harsh environments
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Indicative durability: Medium-term use; site conditions apply · Typical use: Warehouses, factories, permanent indoor/outdoor
Rigid aluminium sheet suited to long-term signage where corrosion resistance and dimensional stability matter.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent outdoor installations and high-durability sites
Peel-and-stick vinyl for smooth surfaces. Walls, doors, machinery, and equipment labelling.
Indicative durability: Short- to medium-term use; surface and exposure affect service life · Typical use: Indoor walls, equipment labels, smooth surfaces
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 225 x 300mm | Up to 5m | Indoor, close range |
| 300 x 450mm | Up to 10m | Standard indoor/outdoor |
| 450 x 600mm | Up to 15m | Outdoor, site entrances |
Optional finishes
Pre-drilled Holes (4 corners)
4 pre-drilled mounting holes in each corner for easy screw or cable-tie installation.
Available with rigid materials only.
Lamination
Clear protective overlaminate for added UV and scratch resistance. Service life still depends on the print, exposure, cleaning and installation.
Available with vinyl or aluminium only.
Reflective Class 1 (High Intensity)
High-intensity prismatic reflective film. Confirm the grade required by the project specification and relevant authority.
Available with vinyl or aluminium only.
Reflective Class 2 (Engineer Grade)
Engineer-grade reflective film for general site visibility. Confirm suitability for the lighting, approach distance and project specification.
Available with vinyl or aluminium only.
Specifications
| Product code | PSS-LC-WKP-0005 |
|---|---|
| Product | Security Badges Must Be Worn at All Times Sign |
| Category | Legal Compliance Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Polypropylene (1.6mm) |
| Selected size | 225 x 300mm (Small) |
| Indicative durability | Medium-term use; site conditions apply |
| Indicative viewing distance | Up to 5m |
| Available sizes | 225 x 300mm (Small), 300 x 450mm (Medium), 450 x 600mm (Large) |
| Available materials | Colorbond Steel (0.6mm), Polypropylene (1.6mm), Aluminium (1.6mm), Self-Adhesive Vinyl (Sticker) |
Selected specifications update with the material and size controls above.
Frequently asked questions
Does this sign satisfy ISO 27001 access-control requirements?
This sign supports the access-control element of ISO 27001 by communicating the requirement to wear security credentials. However, ISO 27001 compliance also requires documented access policies, credential management, and audit trails; this sign is one component of a broader security framework.
Where exactly should I place this sign?
Position it at every entry point into a restricted or security-graded zone — main reception, secure-door airlocks, server-room doors, plant-room entries, and any gate controlling access to sensitive areas. Ensure it's visible BEFORE the door so visitors cannot claim they didn't see it.
What if a visitor loses or forgets their badge?
This sign establishes the rule; your security protocol should include procedures for lost badges and visitor escorts. Visitors without credentials should be directed back to reception or supervised by an authorised employee.
Can I combine this with other security notices?
Yes. Many secure facilities use this sign alongside "Authorised Personnel Only" or "No Photography" notices. We can supply multiple designs in matching sizes and materials.
What material is best for a data centre with high humidity?
Aluminium or Colorbond resist moisture and corrosion better than polypropylene in humid environments. Lamination adds extra protection and extends the sign's life.
You may also like
PS-CAT3671
Private Property No Trespassing
From $21.95
No Trespassing — Violators Will Be Prosecuted
From $21.95
Trespassers Will Be Prosecuted
From $21.95
Private Property — Vendors & Visitors Must Register at Main Office
From $31.95
PS-GEN090
Authorised Personnel Only
From $18.00
Keep Out
From $18.00