Private Property No Trespassing Sign
Product code: PS-CAT3671
For driveways, gates, fence lines and other private-property entry points. Select the material and size to suit outdoor exposure, approach distance and fixing method.
Material
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
Includes $2.90 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $31.95 | — |
| 5-9 | $29.39 | 8% off |
| 10-24 | $27.16 | 15% off |
| 25-49 | $24.28 | 24% off |
| 50-99 | $21.73 | 32% off |
| 100+ | $19.17 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $31.95 | — |
| 5-9 | $29.39 | 8% off |
| 10-24 | $27.16 | 15% off |
| 25-49 | $24.28 | 24% off |
| 50-99 | $21.73 | 32% off |
| 100+ | $19.17 | 40% off |
Product details
Where this sign is commonly used
Display it where people or vehicles normally approach private land: driveways, vehicle gates, pedestrian entries, fence lines, service yards, sheds and rural access points. Position the full message so it can be read before someone crosses the property boundary.
Choosing a material and size
Choose polypropylene, self-adhesive vinyl, 5 mm Corflute or Colorbond steel in 450 × 300 mm, 600 × 450 mm or 900 × 600 mm. Match the material to the mounting surface, outdoor exposure and fixing method, then choose a size for the approach distance and viewing position. Mounting holes apply to rigid materials; lamination and reflective films apply only to vinyl.
Mounting and boundary placement
Self-adhesive vinyl needs a clean, smooth and dry surface. Rigid signs are normally mechanically fixed to a fence, gate, wall or post. Keep the wording clear of vegetation, parked vehicles and gate hardware. Where a long perimeter has several likely approaches, repeat the notice rather than assuming one sign is visible from every direction.
Check the sign format before ordering
This product gives a clear private-property access notice. It does not by itself create an offence, guarantee prosecution or replace fencing, gates, security measures or a direction from the owner or occupier. NSW Police recommends Private Property and No Trespassing signs at entry points and near roads as one part of protecting property boundaries. Legal tests and enforcement differ by jurisdiction and circumstance, so use current local guidance where enforcement is the purpose.
- NSW Police Force — Protect your property from trespass — Crime-prevention guidance recommends maintaining fences and gates and posting Private Property and No Trespassing signs at entry points and near roads. Read source (opens in a new tab)NSW guidance; other jurisdictions may differ.
- NSW legislation — Inclosed Lands Protection Act 1901 — Section 4 concerns entry onto inclosed lands without consent or remaining after a request to leave. The statutory tests depend on the land and circumstances; the Act does not make this sign a standalone guarantee of enforcement. Read source (opens in a new tab)NSW legislation only; this is general product information, not legal advice.
Before ordering
- Confirm that the Private Property No Trespassing wording matches the access instruction you intend to give.
- Choose the material and fixing method for the mounting surface and expected exposure.
- Position the sign at a normal approach so the complete message is readable before entry.
- Check whether additional approaches need another sign and whether fences, gates or other security controls are also required.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Product guidance reviewed by Platinum Signs product and editorial team. Last reviewed: .
Material options
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Indicative durability: Medium-term use; site conditions apply · Typical use: Warehouses, factories, permanent indoor/outdoor
Peel-and-stick vinyl for smooth surfaces. Walls, doors, machinery, and equipment labelling.
Indicative durability: Short- to medium-term use; surface and exposure affect service life · Typical use: Indoor walls, equipment labels, smooth surfaces
Lightweight corrugated plastic board. Easy to fix to fences, hoarding, and temporary structures.
Indicative durability: Temporary use; exposure and installation affect service life · Typical use: Construction sites, temporary signage, events
Rigid coated sheet steel suited to demanding indoor and outdoor installations. Print life depends on finish, exposure, edges and mounting.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent installations, harsh environments
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 300 x 450mm | Up to 10m | Standard indoor/outdoor |
| 450 x 600mm | Up to 15m | Outdoor, site entrances |
| 600 x 900mm | Up to 25m | Large sites, high visibility |
Optional finishes
Pre-drilled Holes (4 corners)
4 pre-drilled mounting holes in each corner for easy screw or cable-tie installation.
Available with rigid materials only.
Lamination
Clear protective overlaminate for added UV and scratch resistance. Service life still depends on the print, exposure, cleaning and installation.
Available with vinyl or aluminium only.
Reflective Class 1 (High Intensity)
High-intensity prismatic reflective film. Confirm the grade required by the project specification and relevant authority.
Available with vinyl or aluminium only.
Reflective Class 2 (Engineer Grade)
Engineer-grade reflective film for general site visibility. Confirm suitability for the lighting, approach distance and project specification.
Available with vinyl or aluminium only.
Specifications
| Product code | PS-CAT3671 |
|---|---|
| Selected SKU | PS-CAT3671-450X300-PP16 |
| Product | Private Property No Trespassing Sign |
| Category | Legal Compliance Signs |
| Format guidance | General property-access notice; not an AS 1319 hazard, prohibition, mandatory or emergency sign |
| Printing | UV direct print |
| Selected material | Polypropylene (1.6mm) |
| Selected size | 450 x 300mm (Medium) |
| Indicative durability | Medium-term use; site conditions apply |
| Indicative viewing distance | Up to 10m |
| Available sizes | 450 x 300mm (Medium), 600 x 450mm (Large), 900 x 600mm (Extra Large) |
| Available materials | Polypropylene (1.6mm), Self-Adhesive Vinyl (Sticker), Corflute (5mm), Colorbond Steel (0.6mm) |
Selected specifications update with the material and size controls above.
Frequently asked questions
What does this Private Property No Trespassing sign communicate?
It gives a clear written notice that the land is private and entry is not permitted. It is a general property-access notice, not an AS 1319 hazard, mandatory, prohibition or emergency sign.
Where and how should the sign be installed?
Place the sign at a normal entry point such as a driveway, gate or pedestrian access, where it can be read before someone crosses the property boundary. Repeat the message where a long perimeter has more than one likely approach. Self-adhesive vinyl needs a clean, smooth and dry surface; rigid signs are normally mechanically fixed to a fence, gate, wall or post. Keep the wording unobstructed and check that gate movement or vegetation will not cover it. Yes. Four-corner pre-drilled holes are an optional extra with a base surcharge of $3.00 inc GST per sign for the listed configurations, before any applicable volume discount. Select the option to update the configured total before adding to cart.
Does displaying the sign guarantee that a trespasser can be prosecuted?
No. A sign can make the property owner's access instruction clear, but it does not by itself create an offence, guarantee enforcement or replace the legal tests that apply in the relevant state or territory. Property boundaries, consent, lawful excuse and the circumstances of entry can matter. Use local legal or police guidance where enforcement is the purpose.
Which material should I choose?
Polypropylene, Corflute and Colorbond steel are rigid choices for mechanically fixed signs; self-adhesive vinyl suits a clean, smooth and dry surface. Select for the mounting surface, exposure, fixing method and expected service conditions. Lamination and reflective films are offered only with vinyl for this product.
What size sign should I order?
Available sizes are 450 x 300mm (Medium), 600 x 450mm (Large), 900 x 600mm (Extra Large). Viewing-distance notes are a practical selection aid, not a substitute for checking the approach distance, lighting, mounting position, wording and site risk assessment.
What volume discounts apply?
Automatic volume pricing is 5–9 signs: 8% off, 10–24 signs: 15% off, 25–49 signs: 24% off, 50–99 signs: 32% off, 100+ signs: 40% off. The configurator is the source of truth and updates the unit price as quantity changes.
You may also like
No Trespassing — Violators Will Be Prosecuted
From $21.95
Trespassers Will Be Prosecuted
From $21.95
Private Property — Vendors & Visitors Must Register at Main Office
From $31.95
PS-GEN090
Authorised Personnel Only
From $18.00
Keep Out
From $18.00
No Dumping — Private Property
From $31.95