Keep Out — No Access Sign
Product code: PSS-LC-CNS-0007
Enforce a hard access boundary around hazardous work zones using the DANGER format specified in AS 1319. This sign is appropriate for excavations, demolition perimeters, and active construction areas where entry could result in serious injury or death. It supports the principal contractor's hazard-management duty under WHS Regulation 34 and the Model Code of Practice: Construction Work.
Material
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
Includes $2.90 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $31.95 | — |
| 5-9 | $29.39 | 8% off |
| 10-24 | $27.16 | 15% off |
| 25-49 | $24.28 | 24% off |
| 50-99 | $21.73 | 32% off |
| 100+ | $19.17 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $31.95 | — |
| 5-9 | $29.39 | 8% off |
| 10-24 | $27.16 | 15% off |
| 25-49 | $24.28 | 24% off |
| 50-99 | $21.73 | 32% off |
| 100+ | $19.17 | 40% off |
Product details
Enforce a hard access boundary around hazardous work zones using the DANGER format specified in AS 1319. This sign is appropriate for excavations, demolition perimeters, and active construction areas where entry could result in serious injury or death. It supports the principal contractor's hazard-management duty under WHS Regulation 34 and the Model Code of Practice: Construction Work.
Red-oval DANGER design on black background, manufactured in colorbond, polypropylene, aluminium, or vinyl in 300×450 mm to 600×900 mm. Reflective class 1 and 2 options ensure visibility at all times.
Platinum Signs provides Australia-wide delivery, trade account pricing, and customisation for site-specific hazard descriptions. Pair with physical barriers and spotters for maximum protection.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Rigid coated sheet steel suited to demanding indoor and outdoor installations. Print life depends on finish, exposure, edges and mounting.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent installations, harsh environments
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Indicative durability: Medium-term use; site conditions apply · Typical use: Warehouses, factories, permanent indoor/outdoor
Rigid aluminium sheet suited to long-term signage where corrosion resistance and dimensional stability matter.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent outdoor installations and high-durability sites
Peel-and-stick vinyl for smooth surfaces. Walls, doors, machinery, and equipment labelling.
Indicative durability: Short- to medium-term use; surface and exposure affect service life · Typical use: Indoor walls, equipment labels, smooth surfaces
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 300 x 450mm | Up to 10m | Standard indoor/outdoor |
| 450 x 600mm | Up to 15m | Outdoor, site entrances |
| 600 x 900mm | Up to 25m | Large sites, high visibility |
Optional finishes
Pre-drilled Holes (4 corners)
4 pre-drilled mounting holes in each corner for easy screw or cable-tie installation.
Available with rigid materials only.
Lamination
Clear protective overlaminate for added UV and scratch resistance. Service life still depends on the print, exposure, cleaning and installation.
Available with vinyl or aluminium only.
Reflective Class 1 (High Intensity)
High-intensity prismatic reflective film. Confirm the grade required by the project specification and relevant authority.
Available with vinyl or aluminium only.
Reflective Class 2 (Engineer Grade)
Engineer-grade reflective film for general site visibility. Confirm suitability for the lighting, approach distance and project specification.
Available with vinyl or aluminium only.
Specifications
| Product code | PSS-LC-CNS-0007 |
|---|---|
| Product | Keep Out — No Access Sign |
| Category | Legal Compliance Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Polypropylene (1.6mm) |
| Selected size | 300 x 450mm (Medium) |
| Indicative durability | Medium-term use; site conditions apply |
| Indicative viewing distance | Up to 10m |
| Available sizes | 300 x 450mm (Medium), 450 x 600mm (Large), 600 x 900mm (Extra Large) |
| Available materials | Colorbond Steel (0.6mm), Polypropylene (1.6mm), Aluminium (1.6mm), Self-Adhesive Vinyl (Sticker) |
Selected specifications update with the material and size controls above.
Frequently asked questions
When should I use DANGER format instead of Notice format?
AS 1319 specifies DANGER (red oval) for situations where entry could cause injury or death—excavations, demolition, active machinery, and high-voltage zones. Use Notice (blue) for informational boundaries without immediate hazard. If you're unsure, consult your site safety officer.
Can I customise the hazard text below 'Keep Out'?
Yes. Specify alternative text such as 'Excavation Hazard', 'Demolition in Progress', or 'Unstable Ground' when ordering. We'll ensure it remains AS 1319 compliant and legible.
What size is best for a deep excavation perimeter?
Available sizes are 300 x 450mm (Medium), 450 x 600mm (Large), 600 x 900mm (Extra Large). Viewing-distance notes are a practical selection aid, not a substitute for checking the approach distance, lighting, mounting position, wording and site risk assessment.
Should I use reflective material for a temporary excavation?
Reflective grades provide different visibility performance. Choose the grade required by the project specification and site conditions, and confirm any road, traffic or high-risk requirement with the relevant authority before ordering.
How do I dispose of the sign when the hazard is removed?
Remove the sign and store it for future use or recycling. Aluminium and colorbond are fully recyclable; polypropylene and vinyl can be disposed of via general waste. Do not leave the sign in place once the hazard has been eliminated.
You may also like
PS-CAT3671
Private Property No Trespassing
From $21.95
No Trespassing — Violators Will Be Prosecuted
From $21.95
Trespassers Will Be Prosecuted
From $21.95
Private Property — Vendors & Visitors Must Register at Main Office
From $31.95
PS-GEN090
Authorised Personnel Only
From $18.00
Keep Out
From $18.00