Danger Watch Your Step Sign
Product code: PSS-WH-DAN-0053
Prevent slip, trip, and fall incidents with this AS 1319–certified danger sign that communicates an immediate hazard to personnel and visitors. The red header and white text format meets Australian safety standards for high-consequence risks, ensuring your message cuts through workplace noise. Available in corflute, polypropylene, Colorbond, and vinyl in sizes from 225×300 mm to 600×900 mm, this sign adapts to stairwells, ramps, uneven surfaces, and entry points. Reflective and laminated finishes extend visibility and lifespan. Platinum Signs supports trade accounts with volume pricing and rapid delivery across Australia.
Material
Lightweight corrugated plastic board. Easy to fix to fences, hoarding, and temporary structures.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
This configuration is temporarily unavailable. Choose another material or size, or contact us for help.
Open printable data sheet in a new tabProduct details
Prevent slip, trip, and fall incidents with this AS 1319–certified danger sign that communicates an immediate hazard to personnel and visitors. The red header and white text format meets Australian safety standards for high-consequence risks, ensuring your message cuts through workplace noise. Available in corflute, polypropylene, Colorbond, and vinyl in sizes from 225×300 mm to 600×900 mm, this sign adapts to stairwells, ramps, uneven surfaces, and entry points. Reflective and laminated finishes extend visibility and lifespan. Platinum Signs supports trade accounts with volume pricing and rapid delivery across Australia.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|
Specifications
| Product code | PSS-WH-DAN-0053 |
|---|---|
| Product | Danger Watch Your Step Sign |
| Category | Danger Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Corflute (5mm) |
| Selected size | 225 x 300,300mm |
| Indicative durability | Temporary use; exposure and installation affect service life |
| Indicative viewing distance | Confirm for the site |
| Available sizes | |
| Available materials |
Selected specifications update with the material and size controls above.
Frequently asked questions
Where is the best location for this sign?
Mount at eye level (approximately 1.5 m) directly before the hazard—staircase entry, ramp, or uneven floor. If multiple entry routes exist, install a sign at each approach point.
Will reflective material help in dimly lit areas?
Reflective grades provide different visibility performance. Choose the grade required by the project specification and site conditions, and confirm any road, traffic or high-risk requirement with the relevant authority before ordering.
What's the durability of each material in high-traffic zones?
Corflute withstands light to moderate foot traffic; polypropylene and vinyl handle frequent contact and cleaning; Colorbond is the most robust choice for heavy-duty industrial environments. Lamination adds protection across all materials.
Can I customise the text or layout?
This design follows AS 1319 specifications for danger signs and cannot be altered without losing compliance. Contact us if you need a bespoke hazard message—we can discuss custom signage options.
What's included in a trade account?
Trade members receive volume discounts, priority dispatch, invoice payment terms, and access to our full range without per-unit minimums. Email sales@platinumsigns.com.au to apply.
