Danger Moving Parts Sign
Product code: PSS-DAN-039
Install a Danger Moving Parts sign wherever machinery, conveyors, or rotating equipment pose an immediate risk of injury or death. Designed to AS 1319 specifications, the red header and white text command attention before anyone enters the hazard zone.
Material
Lightweight corrugated plastic board. Easy to fix to fences, hoarding, and temporary structures.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
This configuration is temporarily unavailable. Choose another material or size, or contact us for help.
Open printable data sheet in a new tabProduct details
Install a Danger Moving Parts sign wherever machinery, conveyors, or rotating equipment pose an immediate risk of injury or death. Designed to AS 1319 specifications, the red header and white text command attention before anyone enters the hazard zone.
Select from corflute, polypropylene, Colorbond steel, or vinyl in sizes from 225×300 mm to 600×900 mm. Lamination extends life in high-traffic areas; reflective options ensure visibility in low-light factory floors or shift work environments.
Trade customers enjoy volume pricing, pre-drilled holes for quick installation, and Australia-wide stock delivery. Platinum Signs holds standard configurations in store, so you can order and receive within days.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|
Specifications
| Product code | PSS-DAN-039 |
|---|---|
| Product | Danger Moving Parts Sign |
| Category | Danger Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Corflute (5mm) |
| Selected size | 225 x 300,300mm |
| Indicative durability | Temporary use; exposure and installation affect service life |
| Indicative viewing distance | Confirm for the site |
| Available sizes | |
| Available materials |
Selected specifications update with the material and size controls above.
Frequently asked questions
Where exactly should I position a moving parts danger sign?
Mount at eye level (approximately 1.5 m) on or immediately adjacent to the machinery—before any guard or access point. Use multiple signs if the machine has several entry points or if sightlines are obstructed.
Should I use reflective coating on a factory floor?
Reflective grades provide different visibility performance. Choose the grade required by the project specification and site conditions, and confirm any road, traffic or high-risk requirement with the relevant authority before ordering.
How durable is polypropylene versus Colorbond for a busy workshop?
Polypropylene resists moisture and is cost-effective for moderate-wear areas; Colorbond steel is harder to damage, handles impact better, and lasts longer in high-traffic or outdoor zones.
Can I order pre-drilled signs ready to mount?
Yes. Four-corner pre-drilled holes are available as an optional extra. The configurator shows the current surcharge for the selected material and size before checkout.
Do you offer lamination to protect printed text over time?
Yes—lamination adds a protective layer that resists fading, scratching, and moisture, extending the sign's legibility and appearance by several years.
