Danger Do Not Remove Guards Sign
Product code: PSS-DAN-019
Prevent machine guard removal with this AS 1319–compliant danger sign. The red header and white 'DANGER' text convey the severity of operating unguarded equipment. Platinum Signs manufactures these signs in corflute, polypropylene, Colorbond steel, and vinyl in four standard sizes (225×300 mm to 600×900 mm). Reflective Class 1 and 2 finishes suit factory floors and shift work. Lamination protects against oil splash and workshop wear. Trade customers benefit from volume discounts and Australia-wide delivery on standard orders.
Material
Lightweight corrugated plastic board. Easy to fix to fences, hoarding, and temporary structures.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
This configuration is temporarily unavailable. Choose another material or size, or contact us for help.
Open printable data sheet in a new tabProduct details
Prevent machine guard removal with this AS 1319–compliant danger sign. The red header and white 'DANGER' text convey the severity of operating unguarded equipment. Platinum Signs manufactures these signs in corflute, polypropylene, Colorbond steel, and vinyl in four standard sizes (225×300 mm to 600×900 mm). Reflective Class 1 and 2 finishes suit factory floors and shift work. Lamination protects against oil splash and workshop wear. Trade customers benefit from volume discounts and Australia-wide delivery on standard orders.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|
Specifications
| Product code | PSS-DAN-019 |
|---|---|
| Product | Danger Do Not Remove Guards Sign |
| Category | Danger Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Corflute (5mm) |
| Selected size | 225 x 300,300mm |
| Indicative durability | Temporary use; exposure and installation affect service life |
| Indicative viewing distance | Confirm for the site |
| Available sizes | |
| Available materials |
Selected specifications update with the material and size controls above.
Frequently asked questions
Is this sign suitable for factory machinery?
Yes, specifically designed for industrial machinery where guards are critical. Laminated polypropylene or Colorbond withstands oil, coolant splash, and vibration.
Should I place one sign per machine or one per workstation?
Place a sign directly on or adjacent to each guarded machine. If multiple machines share a workstation, one sign per hazard point is typical; consult your safety officer.
How often should I inspect these signs for wear?
Inspect monthly in high-traffic areas. Replace if text becomes illegible, lamination peels, or reflective finish dulls significantly.
Can you supply signs for a factory retrofit across multiple sites?
Yes. Provide a list of machine types and site locations; we'll quote a consolidated order with bulk pricing and coordinate staged delivery to each facility.
What's the best way to attach signs to metal machinery frames?
Pre-drilled holes allow bolt or screw mounting. For temporary placement, adhesive-backed options are available; ensure the surface is clean and dry for best adhesion.
