Slippery Surface Picto Sign
Product code: PSS-WS-WRN-0006
A pictogram-only Slippery Surface warning—the yellow-triangle slip-hazard marker without text. This language-neutral format works as a secondary reinforcement sign along pool-deck coping and change-room transitions, reducing visual clutter in multilingual venues while maintaining AS 2416.1 compliance.
Material
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
Includes $2.90 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $31.95 | — |
| 5-9 | $29.39 | 8% off |
| 10-24 | $27.16 | 15% off |
| 25-49 | $24.28 | 24% off |
| 50-99 | $21.73 | 32% off |
| 100+ | $19.17 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $31.95 | — |
| 5-9 | $29.39 | 8% off |
| 10-24 | $27.16 | 15% off |
| 25-49 | $24.28 | 24% off |
| 50-99 | $21.73 | 32% off |
| 100+ | $19.17 | 40% off |
Product details
A pictogram-only Slippery Surface warning—the yellow-triangle slip-hazard marker without text. This language-neutral format works as a secondary reinforcement sign along pool-deck coping and change-room transitions, reducing visual clutter in multilingual venues while maintaining AS 2416.1 compliance.
Polypropylene and marine aluminium are the primary materials; vinyl is available by special order. Sizes range from 300×450 mm to 600×900 mm. Pair with your primary full-legend sign at main entry points. Platinum Signs supplies leisure operators Australia-wide with bulk discounts, pre-drilled mounting holes, and lamination for extended wet-environment durability.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Indicative durability: Medium-term use; site conditions apply · Typical use: Warehouses, factories, permanent indoor/outdoor
Rigid aluminium sheet suited to long-term signage where corrosion resistance and dimensional stability matter.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent outdoor installations and high-durability sites
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 300 x 450mm | Up to 10m | Standard indoor/outdoor |
| 450 x 600mm | Up to 15m | Outdoor, site entrances |
| 600 x 900mm | Up to 25m | Large sites, high visibility |
Optional finishes
Pre-drilled Holes (4 corners)
4 pre-drilled mounting holes in each corner for easy screw or cable-tie installation.
Available with rigid materials only.
Lamination
Clear protective overlaminate for added UV and scratch resistance. Service life still depends on the print, exposure, cleaning and installation.
Available with vinyl or aluminium only.
Specifications
| Product code | PSS-WS-WRN-0006 |
|---|---|
| Product | Slippery Surface Picto Sign |
| Category | Water Safety Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Polypropylene (1.6mm) |
| Selected size | 300 x 450mm (Medium) |
| Indicative durability | Medium-term use; site conditions apply |
| Indicative viewing distance | Up to 10m |
| Available sizes | 300 x 450mm (Medium), 450 x 600mm (Large), 600 x 900mm (Extra Large) |
| Available materials | Polypropylene (1.6mm), Aluminium (1.6mm) |
Selected specifications update with the material and size controls above.
Frequently asked questions
When should I use picto-only instead of full legend?
Use picto-only for secondary markers along deck coping and change-room transitions in multilingual venues. Reserve full-legend signs for primary entry points where new visitors need clear text instruction.
How many picto signs per facility?
Space secondary markers 5–10 metres apart along high-slip-risk zones. Most facilities install one primary full-legend sign at the main entry plus 2–4 picto-only reinforcements around the deck.
Is aluminium overkill for an indoor pool?
Polypropylene is sufficient indoors. Choose aluminium only if the sign is exposed to outdoor weather or coastal salt spray, or if you need maximum durability (10+ years).
Does lamination improve wet-environment performance?
Yes. Lamination seals the surface against moisture ingress and UV fade, extending sign life by 3–5 years in humid pool areas.
Can I order custom spacing for a large facility?
Yes. Our trade team will advise on optimal marker spacing based on your deck layout and visitor flow patterns. Contact sales@platinumsigns.com.au with your site plan.
