Platinum Signs
Slippery Surface Picto Sign
PSS-WS-WRN-0006 · Product data sheet
Data sheet
5 August 2026
https://www.platinumsigns.com.au
Description
A pictogram-only Slippery Surface warning—the yellow-triangle slip-hazard marker without text. This language-neutral format works as a secondary reinforcement sign along pool-deck coping and change-room transitions, reducing visual clutter in multilingual venues while maintaining AS 2416.1 compliance. Polypropylene and marine aluminium are the primary materials; vinyl is available by special order. Sizes range from 300×450 mm to 600×900 mm. Pair with your primary full-legend sign at main entry points. Platinum Signs supplies leisure operators Australia-wide with bulk discounts, pre-drilled mounting holes, and lamination for extended wet-environment durability.
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
- Category
- Water Safety Signs
- Sign selection
- Confirm against site requirements
- Artwork
- Off-the-shelf design supplied as shown
- Product code
- PSS-WS-WRN-0006
Available materials
| Material | Specification |
|---|---|
| Polypropylene (1.6mm) | Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure. Indicative service life: Medium-term use; site conditions apply. Typical use: Warehouses, factories, permanent indoor/outdoor. |
| Aluminium (1.6mm) | Rigid aluminium sheet suited to long-term signage where corrosion resistance and dimensional stability matter. Indicative service life: Long-term substrate; print and site conditions apply. Typical use: Permanent outdoor installations and high-durability sites. |
Available sizes
- • 300 x 450mm (Medium)
- • 450 x 600mm (Large)
- • 600 x 900mm (Extra Large)
Volume pricing — Polypropylene (1.6mm) · 300 x 450mm (Medium) (inc. GST)
| Quantity | Unit price | Saving |
|---|---|---|
| 1-4 | $31.95 | — |
| 5-9 | $29.39 | -8% |
| 10-24 | $27.16 | -15% |
| 25-49 | $24.28 | -24% |
| 50-99 | $21.73 | -32% |
| 100+ | $19.17 | -40% |
Prices shown for the listed material/size combination. Full configuration pricing is available at https://www.platinumsigns.com.au/safety-signs/water-safety/water-safety-slippery-surface-picto.
Frequently asked
When should I use picto-only instead of full legend?
Use picto-only for secondary markers along deck coping and change-room transitions in multilingual venues. Reserve full-legend signs for primary entry points where new visitors need clear text instruction.
How many picto signs per facility?
Space secondary markers 5–10 metres apart along high-slip-risk zones. Most facilities install one primary full-legend sign at the main entry plus 2–4 picto-only reinforcements around the deck.
Is aluminium overkill for an indoor pool?
Polypropylene is sufficient indoors. Choose aluminium only if the sign is exposed to outdoor weather or coastal salt spray, or if you need maximum durability (10+ years).
Does lamination improve wet-environment performance?
Yes. Lamination seals the surface against moisture ingress and UV fade, extending sign life by 3–5 years in humid pool areas.
Can I order custom spacing for a large facility?
Yes. Our trade team will advise on optimal marker spacing based on your deck layout and visitor flow patterns. Contact sales@platinumsigns.com.au with your site plan.