Shallow Water — Do Not Dive (250x350 Pool Panel) Sign
Product code: PSS-WS-PRH-0005
The industry-standard 250×350 mm pool-side panel format that combines shallow-water depth warning with no-diving prohibition on a single sign. This pairing prevents the most common serious pool injury: head-first entry into water shallower than 1.5 metres. The layered pictograms and "SHALLOW WATER — DO NOT DIVE!" legend make the cause-and-effect relationship immediately clear.
Material specification
This product is supplied only in Polypropylene (1.6mm); choose the approved size below.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
Includes $2.55 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $28.00 | — |
| 5-9 | $25.76 | 8% off |
| 10-24 | $23.80 | 15% off |
| 25-49 | $21.28 | 24% off |
| 50-99 | $19.04 | 32% off |
| 100+ | $16.80 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $28.00 | — |
| 5-9 | $25.76 | 8% off |
| 10-24 | $23.80 | 15% off |
| 25-49 | $21.28 | 24% off |
| 50-99 | $19.04 | 32% off |
| 100+ | $16.80 | 40% off |
Product details
The industry-standard 250×350 mm pool-side panel format that combines shallow-water depth warning with no-diving prohibition on a single sign. This pairing prevents the most common serious pool injury: head-first entry into water shallower than 1.5 metres. The layered pictograms and "SHALLOW WATER — DO NOT DIVE!" legend make the cause-and-effect relationship immediately clear.
Polypropylene construction suits above-ground pools, wading pools, and splash-pads. Mounting holes and lamination options are included to extend service life in wet environments. This is the sign you'll find at virtually every council pool and commercial aquatic centre across Australia.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Indicative durability: Medium-term use; site conditions apply · Typical use: Warehouses, factories, permanent indoor/outdoor
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|
Optional finishes
Pre-drilled Holes (4 corners)
4 pre-drilled mounting holes in each corner for easy screw or cable-tie installation.
Available with rigid materials only.
Specifications
| Product code | PSS-WS-PRH-0005 |
|---|---|
| Product | Shallow Water — Do Not Dive (250x350 Pool Panel) Sign |
| Category | Water Safety Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Polypropylene (1.6mm) |
| Selected size | 250 x 350mm |
| Indicative durability | Medium-term use; site conditions apply |
| Indicative viewing distance | Confirm for the site |
| Available sizes | 250 x 350mm |
| Available materials | Polypropylene (1.6mm) |
Selected specifications update with the material and size controls above.
Frequently asked questions
Why is this specific size (250×350) standard?
The appropriate safety-sign category, wording, placement and supporting controls depend on the product purpose, site risk and applicable jurisdiction. Confirm the requirement with your WHS adviser or regulator; a sign alone does not discharge WHS duties.
Can I use this at residential pools?
Yes. Residential above-ground and in-ground pools with shallow sections benefit from this sign. Many councils recommend it for any facility where the shallow end is less than 1.5 m deep.
Is polypropylene durable enough for constant water splash?
Polypropylene is UV-resistant and chlorine-tolerant, making it ideal for wet environments. Lamination adds an extra protective layer if you expect heavy splash or extended sun exposure.
How many should I order for a typical pool?
Most facilities place one primary sign at the shallow-end entry point and one or two secondary markers at the pool corners. Bulk discounts apply from 5+ units.
Does this replace other diving warnings?
This sign addresses the shallow + diving combination. You may still need separate "No Diving" or "Bombing Prohibited" signs at other pool zones depending on facility layout and depth zones.
