No Water Skiing Picto Sign
Product code: PSS-WS-PRH-0012
An AS 2416.1 prohibition sign with red annulus and water-skier pictogram. Used alongside No Jetski signage in no-wake and swim-exclusion zones, at council-managed harbours, national-park rivers, and water-skiing boundary delineation on major waterways. The picto-only format integrates cleanly into busy waterfront environments.
Material
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
Includes $2.90 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $31.95 | — |
| 5-9 | $29.39 | 8% off |
| 10-24 | $27.16 | 15% off |
| 25-49 | $24.28 | 24% off |
| 50-99 | $21.73 | 32% off |
| 100+ | $19.17 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $31.95 | — |
| 5-9 | $29.39 | 8% off |
| 10-24 | $27.16 | 15% off |
| 25-49 | $24.28 | 24% off |
| 50-99 | $21.73 | 32% off |
| 100+ | $19.17 | 40% off |
Product details
An AS 2416.1 prohibition sign with red annulus and water-skier pictogram. Used alongside No Jetski signage in no-wake and swim-exclusion zones, at council-managed harbours, national-park rivers, and water-skiing boundary delineation on major waterways. The picto-only format integrates cleanly into busy waterfront environments.
Polypropylene suits inland freshwater skiing areas; marine-grade aluminium is necessary for marinas, coastal waterways, and high-splash exposure. Three standard sizes fit primary entry points and perimeter runs. Lamination and pre-drilled holes are included for straightforward installation.
Bulk discounts apply to trade and government orders. Australia-wide delivery from Sydney.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Indicative durability: Medium-term use; site conditions apply · Typical use: Warehouses, factories, permanent indoor/outdoor
Rigid aluminium sheet suited to long-term signage where corrosion resistance and dimensional stability matter.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent outdoor installations and high-durability sites
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 300 x 450mm | Up to 10m | Standard indoor/outdoor |
| 450 x 600mm | Up to 15m | Outdoor, site entrances |
| 600 x 900mm | Up to 25m | Large sites, high visibility |
Optional finishes
Pre-drilled Holes (4 corners)
4 pre-drilled mounting holes in each corner for easy screw or cable-tie installation.
Available with rigid materials only.
Lamination
Clear protective overlaminate for added UV and scratch resistance. Service life still depends on the print, exposure, cleaning and installation.
Available with vinyl or aluminium only.
Specifications
| Product code | PSS-WS-PRH-0012 |
|---|---|
| Product | No Water Skiing Picto Sign |
| Category | Water Safety Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Polypropylene (1.6mm) |
| Selected size | 300 x 450mm (Medium) |
| Indicative durability | Medium-term use; site conditions apply |
| Indicative viewing distance | Up to 10m |
| Available sizes | 300 x 450mm (Medium), 450 x 600mm (Large), 600 x 900mm (Extra Large) |
| Available materials | Polypropylene (1.6mm), Aluminium (1.6mm) |
Selected specifications update with the material and size controls above.
Frequently asked questions
Is this sign mandatory for water-skiing areas?
The appropriate safety-sign category, wording, placement and supporting controls depend on the product purpose, site risk and applicable jurisdiction. Confirm the requirement with your WHS adviser or regulator; a sign alone does not discharge WHS duties.
What's the visibility range of each size?
300×450mm is visible from ~15 metres; 450×600mm from ~25 metres; 600×900mm from 35+ metres. Choose based on your waterway width and typical boat-approach speed.
Can I install these on buoys or floating markers?
Our signs are designed for fixed installation on posts, gates, or walls. Floating buoy signage requires different materials and certification—contact us to discuss alternatives.
How do I pair this with No Jetski for maximum clarity?
Mount both signs side by side at the same height and distance from the water. This visual pairing reinforces that the zone is off-limits to all high-speed watercraft.
What's the cost difference between polypropylene and aluminium?
Aluminium is typically 40–60% more expensive but lasts twice as long in saltwater. For inland freshwater, polypropylene offers better value and is still durable.
