Oversize Load Ahead (Double Sided) Sign
Product code: PSS-VEH-014
The double-sided Oversize Load Ahead sign provides visibility from both directions, essential for vehicles operating on two-way routes or in reversing scenarios. Measuring 1200×600 mm per face, this aluminium construction is available with Class 1 or Class 2 reflective finishes for maximum impact in all light conditions.
Material specification
This product is supplied only in Aluminium (1.6mm); choose the approved size below.
Use the size in the approved traffic-control plan or road-authority specification.
Includes $16.82 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $185.00 | — |
| 5-9 | $170.20 | 8% off |
| 10-24 | $157.25 | 15% off |
| 25-49 | $140.60 | 24% off |
| 50-99 | $125.80 | 32% off |
| 100+ | $111.00 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $185.00 | — |
| 5-9 | $170.20 | 8% off |
| 10-24 | $157.25 | 15% off |
| 25-49 | $140.60 | 24% off |
| 50-99 | $125.80 | 32% off |
| 100+ | $111.00 | 40% off |
Product details
The double-sided Oversize Load Ahead sign provides visibility from both directions, essential for vehicles operating on two-way routes or in reversing scenarios. Measuring 1200×600 mm per face, this aluminium construction is available with Class 1 or Class 2 reflective finishes for maximum impact in all light conditions.
Ideal for long-haul freight, wide-load escorts, and plant hire, the double-sided format eliminates the need for separate rear signage. Platinum Signs delivers these high-visibility signs across Australia with trade discounts, fast lead times, and expert advice on compliance and installation.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Rigid aluminium sheet suited to long-term signage where corrosion resistance and dimensional stability matter.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent outdoor installations and high-durability sites
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|
Optional finishes
Reflective Class 1 (High Intensity)
High-intensity prismatic reflective film. Confirm the grade required by the project specification and relevant authority.
Available with vinyl or aluminium only.
Reflective Class 2 (Engineer Grade)
Engineer-grade reflective film for general site visibility. Confirm suitability for the lighting, approach distance and project specification.
Available with vinyl or aluminium only.
Specifications
| Product code | PSS-VEH-014 |
|---|---|
| Product | Oversize Load Ahead (Double Sided) Sign |
| Category | Vehicle Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Aluminium (1.6mm) |
| Selected size | 1200 x 600mm |
| Indicative durability | Long-term substrate; print and site conditions apply |
| Indicative viewing distance | Confirm for the site |
| Available sizes | 1200 x 600mm |
| Available materials | Aluminium (1.6mm) |
Selected specifications update with the material and size controls above.
Frequently asked questions
Why choose a double-sided sign instead of two single signs?
Double-sided signs reduce weight, simplify mounting, and ensure consistent messaging front and rear—ideal for vehicles that reverse frequently or operate on two-way routes.
Are both sides identical or can they differ?
Both sides are identical by default; custom designs with different messaging on each face are available on request.
What is the total weight of a 1200×600 double-sided aluminium sign?
Approximately 8–10 kg depending on reflective grade; this is light enough for most vehicle mounting systems but we recommend professional installation.
How is the sign mounted between the two aluminium faces?
Signs are typically mounted via a central post or bracket system that holds both faces parallel; we provide mounting hardware recommendations based on your vehicle.
What's the lead time for double-sided signs?
Standard orders ship within 5–7 business days; bulk or custom orders may take longer—contact us for your specific timeline.
You may also like
Do Not Overtake Turning Vehicle Traffic Signs
From $40.00
Do Not Overtake Turning Vehicle Rear Marker Plates - Pair
From $40.00
Rear Marker Plates, Pair, Red/Ylw
From $35.00
Do Not Overtake Turning Vehicle (Square)
From $35.00
Candy Stripes (2 pieces)
From $65.00
Candy Stripes (2 pieces) Vehicle Signs
From $65.00