Candy Stripes (2 pieces) Vehicle Signs Sign
Product code: SS-VEH-006
Candy Stripes in two-piece configuration deliver conspicuous chevron marking for wide loads, slow-moving plant, and agricultural vehicles operating on Australian roads. Each panel measures 900×150 mm and is fabricated from corrosion-resistant aluminium with your choice of Class 1 or Class 2 reflective sheeting. This format suits vehicles requiring visible side or rear demarcation to meet transport authority guidelines. Platinum Signs supplies trade accounts with volume discounts, rapid processing, and nationwide freight to depots and job sites.
Material specification
This product is supplied only in Aluminium (1.6mm); choose the approved size below.
Use the size in the approved traffic-control plan or road-authority specification.
Includes $5.91 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $65.00 | — |
| 5-9 | $59.80 | 8% off |
| 10-24 | $55.25 | 15% off |
| 25-49 | $49.40 | 24% off |
| 50-99 | $44.20 | 32% off |
| 100+ | $39.00 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $65.00 | — |
| 5-9 | $59.80 | 8% off |
| 10-24 | $55.25 | 15% off |
| 25-49 | $49.40 | 24% off |
| 50-99 | $44.20 | 32% off |
| 100+ | $39.00 | 40% off |
Product details
Candy Stripes in two-piece configuration deliver conspicuous chevron marking for wide loads, slow-moving plant, and agricultural vehicles operating on Australian roads. Each panel measures 900×150 mm and is fabricated from corrosion-resistant aluminium with your choice of Class 1 or Class 2 reflective sheeting. This format suits vehicles requiring visible side or rear demarcation to meet transport authority guidelines. Platinum Signs supplies trade accounts with volume discounts, rapid processing, and nationwide freight to depots and job sites.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Rigid aluminium sheet suited to long-term signage where corrosion resistance and dimensional stability matter.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent outdoor installations and high-durability sites
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|
Optional finishes
Reflective Class 1 (High Intensity)
High-intensity prismatic reflective film. Confirm the grade required by the project specification and relevant authority.
Available with vinyl or aluminium only.
Reflective Class 2 (Engineer Grade)
Engineer-grade reflective film for general site visibility. Confirm suitability for the lighting, approach distance and project specification.
Available with vinyl or aluminium only.
Specifications
| Product code | SS-VEH-006 |
|---|---|
| Product | Candy Stripes (2 pieces) Vehicle Signs Sign |
| Category | Vehicle Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Aluminium (1.6mm) |
| Selected size | 900 x 150mm |
| Indicative durability | Long-term substrate; print and site conditions apply |
| Indicative viewing distance | Confirm for the site |
| Available sizes | 900 x 150mm |
| Available materials | Aluminium (1.6mm) |
Selected specifications update with the material and size controls above.
Frequently asked questions
Which reflective class should I choose for my vehicle?
Reflective grades provide different visibility performance. Choose the grade required by the project specification and site conditions, and confirm any road, traffic or high-risk requirement with the relevant authority before ordering.
Do the two pieces need to be installed together?
No. The two-piece set allows flexible positioning on different parts of the vehicle. Many operators fit one piece per side or position them to suit load profile.
What fixing method should I use?
Drill and bolt the aluminium substrate using stainless steel fasteners. Adhesive backing is not recommended for high-vibration or long-distance applications.
Are trade discounts available for fleet orders?
Automatic volume pricing is 5–9 signs: 8% off, 10–24 signs: 15% off, 25–49 signs: 24% off, 50–99 signs: 32% off, 100+ signs: 40% off. The configurator is the source of truth and updates the unit price as quantity changes.
How quickly can you deliver to regional areas?
Stock items ship within 2 business days. Delivery to regional Australia typically takes 3–5 working days depending on postcode and freight carrier.
