Candy Stripes (1 piece) Sign
Product code: SS-VEH-007
The single-piece Candy Stripes panel (900×150 mm) offers a cost-effective chevron marking solution for vehicles requiring partial or rear visibility enhancement. Manufactured from durable aluminium and available in Class 1 or Class 2 reflective finishes, this sign meets Australian transport standards for wide-load identification. Ideal for smaller plant, agricultural equipment, and contractor vehicles, the single panel can be mounted independently or paired with additional units. Platinum Signs delivers nationwide with flexible bulk pricing for operators fitting multiple vehicles.
Material specification
This product is supplied only in Aluminium (1.6mm); choose the approved size below.
Use the size in the approved traffic-control plan or road-authority specification.
Includes $5.91 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $65.00 | — |
| 5-9 | $59.80 | 8% off |
| 10-24 | $55.25 | 15% off |
| 25-49 | $49.40 | 24% off |
| 50-99 | $44.20 | 32% off |
| 100+ | $39.00 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $65.00 | — |
| 5-9 | $59.80 | 8% off |
| 10-24 | $55.25 | 15% off |
| 25-49 | $49.40 | 24% off |
| 50-99 | $44.20 | 32% off |
| 100+ | $39.00 | 40% off |
Product details
The single-piece Candy Stripes panel (900×150 mm) offers a cost-effective chevron marking solution for vehicles requiring partial or rear visibility enhancement. Manufactured from durable aluminium and available in Class 1 or Class 2 reflective finishes, this sign meets Australian transport standards for wide-load identification. Ideal for smaller plant, agricultural equipment, and contractor vehicles, the single panel can be mounted independently or paired with additional units. Platinum Signs delivers nationwide with flexible bulk pricing for operators fitting multiple vehicles.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Rigid aluminium sheet suited to long-term signage where corrosion resistance and dimensional stability matter.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent outdoor installations and high-durability sites
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|
Optional finishes
Reflective Class 1 (High Intensity)
High-intensity prismatic reflective film. Confirm the grade required by the project specification and relevant authority.
Available with vinyl or aluminium only.
Reflective Class 2 (Engineer Grade)
Engineer-grade reflective film for general site visibility. Confirm suitability for the lighting, approach distance and project specification.
Available with vinyl or aluminium only.
Specifications
| Product code | SS-VEH-007 |
|---|---|
| Product | Candy Stripes (1 piece) Sign |
| Category | Vehicle Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Aluminium (1.6mm) |
| Selected size | 900 x 150mm |
| Indicative durability | Long-term substrate; print and site conditions apply |
| Indicative viewing distance | Confirm for the site |
| Available sizes | 900 x 150mm |
| Available materials | Aluminium (1.6mm) |
Selected specifications update with the material and size controls above.
Frequently asked questions
Is one stripe sufficient for my vehicle?
A single panel suits smaller vehicles or rear-only marking. Larger or wide-load vehicles typically require multiple stripes for full side and rear coverage.
Can I upgrade the reflective class later?
Reflective grades provide different visibility performance. Choose the grade required by the project specification and site conditions, and confirm any road, traffic or high-risk requirement with the relevant authority before ordering.
What is the weight of one stripe?
Approximately 1.5 kg, making it lightweight for single-handed installation on most vehicle types without structural reinforcement.
Do you offer discounts if I buy multiple single stripes?
Automatic volume pricing is 5–9 signs: 8% off, 10–24 signs: 15% off, 25–49 signs: 24% off, 50–99 signs: 32% off, 100+ signs: 40% off. The configurator is the source of truth and updates the unit price as quantity changes.
Can I combine single and two-piece stripes in one order?
Yes. Mix-and-match orders are welcome. Bulk discounts apply to total unit count across all stripe configurations.
You may also like
Do Not Overtake Turning Vehicle Traffic Signs
From $40.00
Do Not Overtake Turning Vehicle Rear Marker Plates - Pair
From $40.00
Rear Marker Plates, Pair, Red/Ylw
From $35.00
Do Not Overtake Turning Vehicle (Square)
From $35.00
Candy Stripes (2 pieces)
From $65.00
Candy Stripes (2 pieces) Vehicle Signs
From $65.00