Oversize (2 pieces) Sign
Product code: PSS-VEH-021
Two-piece oversize sign set, each measuring 510 × 250 mm, in durable aluminium with reflective Class 1 or Class 2 options. Paired placement on your vehicle maximises visibility and meets Australian transport regulations for oversize vehicle identification.
Material specification
This product is supplied only in Aluminium (1.6mm); choose the approved size below.
Use the size in the approved traffic-control plan or road-authority specification.
Includes $6.36 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $70.00 | — |
| 5-9 | $64.40 | 8% off |
| 10-24 | $59.50 | 15% off |
| 25-49 | $53.20 | 24% off |
| 50-99 | $47.60 | 32% off |
| 100+ | $42.00 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $70.00 | — |
| 5-9 | $64.40 | 8% off |
| 10-24 | $59.50 | 15% off |
| 25-49 | $53.20 | 24% off |
| 50-99 | $47.60 | 32% off |
| 100+ | $42.00 | 40% off |
Product details
Two-piece oversize sign set, each measuring 510 × 250 mm, in durable aluminium with reflective Class 1 or Class 2 options. Paired placement on your vehicle maximises visibility and meets Australian transport regulations for oversize vehicle identification.
Aluminium resists corrosion and vibration across all climates. The two-piece configuration suits vehicles where a single large banner isn't practical, or where symmetrical front/rear marking is required. Platinum Signs delivers nationwide; trade buyers benefit from bulk pricing on fleet quantities.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Rigid aluminium sheet suited to long-term signage where corrosion resistance and dimensional stability matter.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent outdoor installations and high-durability sites
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|
Optional finishes
Reflective Class 1 (High Intensity)
High-intensity prismatic reflective film. Confirm the grade required by the project specification and relevant authority.
Available with vinyl or aluminium only.
Reflective Class 2 (Engineer Grade)
Engineer-grade reflective film for general site visibility. Confirm suitability for the lighting, approach distance and project specification.
Available with vinyl or aluminium only.
Specifications
| Product code | PSS-VEH-021 |
|---|---|
| Product | Oversize (2 pieces) Sign |
| Category | Vehicle Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Aluminium (1.6mm) |
| Selected size | 510 x 250mm |
| Indicative durability | Long-term substrate; print and site conditions apply |
| Indicative viewing distance | Confirm for the site |
| Available sizes | 510 x 250mm |
| Available materials | Aluminium (1.6mm) |
Selected specifications update with the material and size controls above.
Frequently asked questions
Why would I choose a two-piece set over a single large banner?
Two smaller signs work better on vehicles with limited panel space, allow front and rear placement for visibility from both directions, and can be positioned to avoid windows or existing fittings.
Do both pieces come with the same reflective grade?
Reflective grades provide different visibility performance. Choose the grade required by the project specification and site conditions, and confirm any road, traffic or high-risk requirement with the relevant authority before ordering.
What mounting hardware is needed?
The aluminium backing accepts bolts or rivets. We recommend stainless fasteners to prevent corrosion. Mounting kits are available separately.
Can I order just one piece, or do I have to buy the pair?
The set is sold as a pair. Contact our sales team if you need a single unit or a custom quantity.
You may also like
Do Not Overtake Turning Vehicle Traffic Signs
From $40.00
Do Not Overtake Turning Vehicle Rear Marker Plates - Pair
From $40.00
Rear Marker Plates, Pair, Red/Ylw
From $35.00
Do Not Overtake Turning Vehicle (Square)
From $35.00
Candy Stripes (2 pieces)
From $65.00
Candy Stripes (2 pieces) Vehicle Signs
From $65.00