No Smoking Oxygen in Use Sign
Product code: PSS-WH-GEN-0031
The No Smoking Oxygen in Use sign is essential for medical facilities, laboratories, and industrial sites where oxygen or other oxidising agents are present. Non-compliance with fire safety signage in these environments carries serious legal and safety consequences, making an AS 1319–compliant sign a regulatory necessity.
Material
Rigid coated sheet steel suited to demanding indoor and outdoor installations. Print life depends on finish, exposure, edges and mounting.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
This configuration is temporarily unavailable. Choose another material or size, or contact us for help.
Open printable data sheet in a new tabProduct details
The No Smoking Oxygen in Use sign is essential for medical facilities, laboratories, and industrial sites where oxygen or other oxidising agents are present. Non-compliance with fire safety signage in these environments carries serious legal and safety consequences, making an AS 1319–compliant sign a regulatory necessity.
Offered in polypropylene and colorbond in three sizes: 300×225 mm, 450×300 mm, and 600×400 mm. Polypropylene suits indoor and sheltered outdoor areas, while colorbond withstands extended sun and weather exposure.
Trade customers benefit from bulk discounts, rapid production, and nationwide delivery. Add lamination or reflective Class 1 or 2 overlays to boost visibility in low-light or high-traffic zones.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|
Specifications
| Product code | PSS-WH-GEN-0031 |
|---|---|
| Product | No Smoking Oxygen in Use Sign |
| Category | Statutory Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Colorbond Steel (0.6mm) |
| Selected size | 300 x 225mm |
| Indicative durability | Long-term substrate; print and site conditions apply |
| Indicative viewing distance | Confirm for the site |
| Available sizes | |
| Available materials |
Selected specifications update with the material and size controls above.
Frequently asked questions
Where should this sign be displayed?
Position it at all entry points to oxygen storage areas, medical gas rooms, and treatment spaces where ignition sources must be eliminated.
What's the difference between polypropylene and colorbond?
Polypropylene is lightweight and cost-effective for indoor/sheltered use; colorbond is thicker, more rigid, and better for outdoor or high-traffic environments.
Do you offer reflective versions?
Reflective grades provide different visibility performance. Choose the grade required by the project specification and site conditions, and confirm any road, traffic or high-risk requirement with the relevant authority before ordering.
Can I order multiple signs at once?
Definitely. Trade accounts receive volume discounts. Email us with your quantities and we'll provide a tailored quote.
How is this sign mounted?
We can pre-drill holes at no extra cost, or you can use adhesive backing. Specify your preference at purchase.
Is this AS 1319 compliant?
Yes, it meets all Australian workplace signage standards for statutory and prohibition notices.
