Platinum Signs
No Smoking Oxygen in Use Sign
PSS-WH-GEN-0031 · Product data sheet
Data sheet
5 August 2026
https://www.platinumsigns.com.au
Description
The No Smoking Oxygen in Use sign is essential for medical facilities, laboratories, and industrial sites where oxygen or other oxidising agents are present. Non-compliance with fire safety signage in these environments carries serious legal and safety consequences, making an AS 1319–compliant sign a regulatory necessity. Offered in polypropylene and colorbond in three sizes: 300×225 mm, 450×300 mm, and 600×400 mm. Polypropylene suits indoor and sheltered outdoor areas, while colorbond withstands extended sun and weather exposure. Trade customers benefit from bulk discounts, rapid production, and nationwide delivery. Add lamination or reflective Class 1 or 2 overlays to boost visibility in low-light or high-traffic zones.
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
- Category
- Statutory Signs
- Sign selection
- Confirm against site requirements
- Artwork
- Off-the-shelf design supplied as shown
- Product code
- PSS-WH-GEN-0031
Available materials
| Material | Specification |
|---|
Available sizes
Frequently asked
Where should this sign be displayed?
Position it at all entry points to oxygen storage areas, medical gas rooms, and treatment spaces where ignition sources must be eliminated.
What's the difference between polypropylene and colorbond?
Polypropylene is lightweight and cost-effective for indoor/sheltered use; colorbond is thicker, more rigid, and better for outdoor or high-traffic environments.
Do you offer reflective versions?
Reflective grades provide different visibility performance. Choose the grade required by the project specification and site conditions, and confirm any road, traffic or high-risk requirement with the relevant authority before ordering.
Can I order multiple signs at once?
Definitely. Trade accounts receive volume discounts. Email us with your quantities and we'll provide a tailored quote.
How is this sign mounted?
We can pre-drill holes at no extra cost, or you can use adhesive backing. Specify your preference at purchase.
Is this AS 1319 compliant?
Yes, it meets all Australian workplace signage standards for statutory and prohibition notices.