Danger No Smoking No Ignition Sources Sign
Product code: PSS-WH-DAN-0045
Protect flammable atmospheres and explosive environments with this comprehensive danger sign addressing smoking and ignition sources. The AS 1319 red header and white text clearly communicate dual hazards in one sign, reducing clutter while maintaining compliance. Corflute, polypropylene, and Colorbond materials suit indoor and outdoor installations in sizes 300×225 mm to 600×450 mm. Lamination and reflective options enhance visibility in low-light conditions. Trade accounts enjoy volume pricing and rapid Australia-wide dispatch.
Material
Lightweight corrugated plastic board. Easy to fix to fences, hoarding, and temporary structures.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
This configuration is temporarily unavailable. Choose another material or size, or contact us for help.
Open printable data sheet in a new tabProduct details
Protect flammable atmospheres and explosive environments with this comprehensive danger sign addressing smoking and ignition sources. The AS 1319 red header and white text clearly communicate dual hazards in one sign, reducing clutter while maintaining compliance. Corflute, polypropylene, and Colorbond materials suit indoor and outdoor installations in sizes 300×225 mm to 600×450 mm. Lamination and reflective options enhance visibility in low-light conditions. Trade accounts enjoy volume pricing and rapid Australia-wide dispatch.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|
Specifications
| Product code | PSS-WH-DAN-0045 |
|---|---|
| Product | Danger No Smoking No Ignition Sources Sign |
| Category | Statutory Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Corflute (5mm) |
| Selected size | 300 x 225mm |
| Indicative durability | Temporary use; exposure and installation affect service life |
| Indicative viewing distance | Confirm for the site |
| Available sizes | |
| Available materials |
Selected specifications update with the material and size controls above.
Frequently asked questions
What counts as an 'ignition source' in a hazardous area?
Ignition sources include naked flames, hot surfaces, sparks, static discharge, and electrical faults. This sign alerts workers to avoid all such hazards in flammable gas or vapour zones.
Is this sign suitable for petrol pump areas and refineries?
Yes—it's commonly used at fuel depots, refineries, and chemical plants where both smoking and spark risks exist. Colorbond is preferred for durability in these harsh environments.
Can I laminate a Colorbond sign for extra protection?
Lamination is most effective on corflute and polypropylene. Colorbond is already weather-sealed; lamination adds minimal benefit and is not recommended.
How do I know if my area qualifies as 'flammable'?
Your site's risk assessment or safety documentation will specify hazardous zones. Consult your safety officer or compliance team to confirm signage requirements.
Do you supply matching caution and prohibition signs for the same area?
Absolutely. We stock the full AS 1319 range—danger, caution, prohibition, and mandatory signs. Bulk orders combining multiple types qualify for enhanced trade discounts.
