Skip to content
Platinum Signs

Platinum Signs

Danger No Smoking No Ignition Sources Sign

PSS-WH-DAN-0045 · Product data sheet

Data sheet

5 August 2026

https://www.platinumsigns.com.au

Danger No Smoking No Ignition Sources Sign

Description

Protect flammable atmospheres and explosive environments with this comprehensive danger sign addressing smoking and ignition sources. The AS 1319 red header and white text clearly communicate dual hazards in one sign, reducing clutter while maintaining compliance. Corflute, polypropylene, and Colorbond materials suit indoor and outdoor installations in sizes 300×225 mm to 600×450 mm. Lamination and reflective options enhance visibility in low-light conditions. Trade accounts enjoy volume pricing and rapid Australia-wide dispatch.

Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.

Category
Statutory Signs
Sign selection
Confirm against site requirements
Artwork
Off-the-shelf design supplied as shown
Product code
PSS-WH-DAN-0045

Available materials

MaterialSpecification

Available sizes

    Frequently asked

    What counts as an 'ignition source' in a hazardous area?

    Ignition sources include naked flames, hot surfaces, sparks, static discharge, and electrical faults. This sign alerts workers to avoid all such hazards in flammable gas or vapour zones.

    Is this sign suitable for petrol pump areas and refineries?

    Yes—it's commonly used at fuel depots, refineries, and chemical plants where both smoking and spark risks exist. Colorbond is preferred for durability in these harsh environments.

    Can I laminate a Colorbond sign for extra protection?

    Lamination is most effective on corflute and polypropylene. Colorbond is already weather-sealed; lamination adds minimal benefit and is not recommended.

    How do I know if my area qualifies as 'flammable'?

    Your site's risk assessment or safety documentation will specify hazardous zones. Consult your safety officer or compliance team to confirm signage requirements.

    Do you supply matching caution and prohibition signs for the same area?

    Absolutely. We stock the full AS 1319 range—danger, caution, prohibition, and mandatory signs. Bulk orders combining multiple types qualify for enhanced trade discounts.

    Platinum Signs · Product data sheethttps://www.platinumsigns.com.au · PSS-WH-DAN-0045