Danger Flammable Goods No Smoking Sparks Flames Sign
Product code: PSS-WH-DAN-0025
This danger sign alerts to flammable goods storage and the critical prohibition on smoking, sparks, and open flames. The red header with white 'DANGER' text adheres to AS 1319 for hazards posing immediate risk to life. Install at warehouses, distribution centres, chemical storage areas, and any location where combustible materials are handled or stored.
Material
Lightweight corrugated plastic board. Easy to fix to fences, hoarding, and temporary structures.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
This configuration is temporarily unavailable. Choose another material or size, or contact us for help.
Open printable data sheet in a new tabProduct details
This danger sign alerts to flammable goods storage and the critical prohibition on smoking, sparks, and open flames. The red header with white 'DANGER' text adheres to AS 1319 for hazards posing immediate risk to life. Install at warehouses, distribution centres, chemical storage areas, and any location where combustible materials are handled or stored.
Available in corflute, Colorbond, or polypropylene across three standard sizes (300×225 mm to 600×450 mm). Reflective Class 1 or 2 finishes improve visibility in poorly lit conditions; lamination resists weathering and chemical splash.
Trade accounts receive volume discounts. Australia-wide delivery with 5-day standard turnaround.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|
Specifications
| Product code | PSS-WH-DAN-0025 |
|---|---|
| Product | Danger Flammable Goods No Smoking Sparks Flames Sign |
| Category | Statutory Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Corflute (5mm) |
| Selected size | 300 x 225mm |
| Indicative durability | Temporary use; exposure and installation affect service life |
| Indicative viewing distance | Confirm for the site |
| Available sizes | |
| Available materials |
Selected specifications update with the material and size controls above.
Frequently asked questions
What's the difference between flammable gas and flammable goods signs?
The gas version warns of vaporous hazards; the goods version addresses solid or liquid combustible materials. Choose based on the actual hazard present in your facility.
How often should I replace this sign?
Corflute typically lasts 3–5 years; Colorbond 10+ years. Inspect annually and replace if text fades, lamination peels, or physical damage occurs.
Can I order a mix of sizes for a large warehouse?
Yes. We can supply multiple sizes in a single order. Provide a breakdown of quantities per size, and we'll include them on one invoice with a volume discount.
Are these signs suitable for chemical storage areas?
Yes, particularly with lamination or Colorbond, which resist chemical splash and fumes. Confirm your specific chemical environment and any additional labelling requirements with your safety team.
What mounting options are available?
Pre-drilled holes for bolt or screw fixing are standard. We also supply adhesive-backed vinyl versions on request for temporary or non-permanent installations.
