Spill Kit Sign – Equipment Location
Product code: PS-FAE011
Identify an installed spill kit with the exact green landscape SPILL KIT artwork shown. The kit selection, contents, response procedure and training are managed separately.
Material
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
Includes $2.45 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $26.90 | — |
| 5-9 | $24.75 | 8% off |
| 10-24 | $22.87 | 15% off |
| 25-49 | $20.44 | 24% off |
| 50-99 | $18.29 | 32% off |
| 100+ | $16.14 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $26.90 | — |
| 5-9 | $24.75 | 8% off |
| 10-24 | $22.87 | 15% off |
| 25-49 | $20.44 | 24% off |
| 50-99 | $18.29 | 32% off |
| 100+ | $16.14 | 40% off |
Product details
Identify the actual spill-kit location
Place the sign at, above or immediately beside the spill kit it identifies. Confirm the equipment is present and accessible at that point, and keep the complete SPILL KIT legend visible on the normal approach without blocking the kit or its instructions.
Match the kit to the site risk
The sign identifies a location; it does not choose the response equipment. Have the responsible site people confirm that the kit type, capacity and contents are suitable for the substances, quantities, safety data sheets, foreseeable spills, disposal arrangements and worker procedures.
Choose a landscape size and material
Polypropylene is the default rigid option. Vinyl suits a prepared smooth surface, Corflute suits temporary placement, and Colorbond steel provides a stronger mechanically fixed face. Choose 300 × 200 mm for compact close-range identification or 450 × 300 mm for greater prominence.
Keep route guidance and response procedures separate
The exact artwork has no arrow and is not a spill-response instruction. Add separately verified directional signs where the kit cannot be seen from a genuine decision point, and maintain the site's training, safety data sheets, response procedure, inspection and restocking arrangements separately.
Check the sign format before ordering
This printed sign identifies an installed spill-kit location. It does not select, include, inspect, restock or certify the kit and does not replace safety data sheets, spill-response procedures, training or other controls. Confirm the site-specific equipment and applicable requirements before ordering.
- Standards Australia – AS 1319:1994 Safety signs for the occupational environment — AS 1319 specifies requirements for the design and use of safety signs intended for the occupational environment. Referencing the standard does not certify this printed product or determine that the wording, equipment or placement is sufficient for a particular workplace. Read source (opens in a new tab)Standard reference only; confirm the applicable sign category, design, use and site requirements for the project.
- Safe Work Australia – Managing risks of hazardous chemicals in the workplace — The model Code provides guidance on identifying, assessing and controlling hazardous-chemical risks, including emergency planning and spill containment. A location sign is only one communication aid within those broader controls. Read source (opens in a new tab)Check whether the model Code has legal effect in the relevant jurisdiction and confirm the site's chemicals, SDS information, equipment and procedures.
Before ordering
- Confirm that a spill kit is installed at the location the sign will identify.
- Check that the exact text-only SPILL KIT legend and no-arrow landscape format match the required site message.
- Have the responsible site people confirm the kit type, capacity and contents against the substances, risks and response plan.
- Choose 300 × 200 mm or 450 × 300 mm, the material and a fixing method suited to the surface, exposure and sightline.
- Confirm access, directional signs, SDS information, procedures, training, inspection and restocking separately from the sign order.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Product guidance reviewed by Platinum Signs product and editorial team. Last reviewed: .
Material options
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Indicative durability: Medium-term use; site conditions apply · Typical use: Warehouses, factories, permanent indoor/outdoor
Peel-and-stick vinyl for smooth surfaces. Walls, doors, machinery, and equipment labelling.
Indicative durability: Short- to medium-term use; surface and exposure affect service life · Typical use: Indoor walls, equipment labels, smooth surfaces
Lightweight corrugated plastic board. Easy to fix to fences, hoarding, and temporary structures.
Indicative durability: Temporary use; exposure and installation affect service life · Typical use: Construction sites, temporary signage, events
Rigid coated sheet steel suited to demanding indoor and outdoor installations. Print life depends on finish, exposure, edges and mounting.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent installations, harsh environments
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 200 x 300mm | Close range | Compact equipment-location signs |
| 300 x 450mm | Up to 10m | Standard indoor/outdoor |
Optional finishes
Pre-drilled Holes (4 corners)
4 pre-drilled mounting holes in each corner for easy screw or cable-tie installation.
Available with rigid materials only.
Lamination
Clear protective overlaminate for added UV and scratch resistance. Service life still depends on the print, exposure, cleaning and installation.
Available with vinyl or aluminium only.
Specifications
| Product code | PS-FAE011 |
|---|---|
| Selected SKU | PS-FAE011-300X200-PP16 |
| Product | Spill Kit Sign – Equipment Location |
| Category | Safe Condition Signs |
| Format guidance | Green landscape equipment-location sign with white border, exact two-line SPILL KIT legend, no pictogram and no directional arrow |
| Printing | UV direct print |
| Selected material | Polypropylene (1.6mm) |
| Selected size | 300 x 200mm (Compact) |
| Indicative durability | Medium-term use; site conditions apply |
| Indicative viewing distance | Close range |
| Available sizes | 300 x 200mm (Compact), 450 x 300mm (Medium) |
| Available materials | Polypropylene (1.6mm), Self-Adhesive Vinyl (Sticker), Corflute (5mm), Colorbond Steel (0.6mm) |
Selected specifications update with the material and size controls above.
Frequently asked questions
What exactly is printed on this Spill Kit sign?
The approved landscape artwork has a green field, white border and the exact two-line legend SPILL KIT. It is text-only: there is no pictogram, directional arrow, logo or GHS hazard symbol.
Does the sign include a spill kit or spill-response supplies?
No. This product is the printed location sign only. It does not include a spill kit, absorbents, PPE, disposal containers, installation, inspection, restocking, training, a response procedure or a spill-response service.
Where should the Spill Kit sign be installed?
Install it at, above or immediately beside the spill kit it identifies, where the complete face can be seen on the normal approach without obstructing access to the equipment. Keep the marker aligned with the kit if equipment or site layouts change.
Can this sign direct people to a spill kit around a corner?
Not by itself. The approved artwork has no arrow, so it identifies the equipment location rather than a route. Use separately verified directional signs at genuine decision points when the spill kit cannot be seen from the approach.
Which material and size should I choose?
Polypropylene is the default rigid option. Vinyl suits a clean, smooth surface, Corflute suits temporary placement, and Colorbond steel provides a stronger mechanically fixed face. Choose 300 × 200 mm for compact close-range identification or 450 × 300 mm for greater prominence. Optional holes apply only to rigid materials.
What volume discounts apply?
Automatic volume pricing is 5–9 signs: 8% off, 10–24 signs: 15% off, 25–49 signs: 24% off, 50–99 signs: 32% off, 100+ signs: 40% off. The configurator is the source of truth and updates the unit price as quantity changes.
