Platinum Signs
Spill Kit Sign – Equipment Location
PS-FAE011 · Product data sheet
Data sheet
5 August 2026
https://www.platinumsigns.com.au
Description
Use this Spill Kit sign to identify the location of an installed spill-response kit in a warehouse, workshop, chemical store, loading area, plant room or other managed workplace. The verified landscape artwork has a green field, white border and the exact two-line legend SPILL KIT. It is text-only: there is no pictogram, directional arrow, logo or GHS hazard symbol, so it marks the equipment location without labelling a chemical or implying a route. The verified catalogue dimensions are 300 × 200 mm and 450 × 300 mm in landscape orientation. Polypropylene is preselected as the practical rigid option for routine indoor and general site use. Self-adhesive vinyl suits a clean, smooth surface; 5 mm Corflute suits temporary placement; and Colorbond steel provides a stronger rigid face for mechanical fixing. Optional mounting holes apply only to rigid materials, while lamination is available only with a compatible material shown in the configurator. Install the sign at, above or immediately beside the spill kit it identifies and keep the complete face visible on the normal approach without obstructing access. Confirm that the kit type and contents match the substances, quantities, safety data sheets, site risks and response arrangements. If the kit is not visible from a doorway, aisle junction or other decision point, use separately verified directional signs whose arrows match the actual route. This product is the printed sign only. It does not include a spill kit, absorbents, booms, PPE, disposal containers, installation, inspection, restocking, spill response, training, a safety data sheet or a response procedure. It does not establish that the kit is suitable for a particular substance or spill and does not certify compliance. Confirm the equipment, access, procedures, emergency arrangements and applicable jurisdictional requirements with the competent people responsible for the workplace.
This printed sign identifies an installed spill-kit location. It does not select, include, inspect, restock or certify the kit and does not replace safety data sheets, spill-response procedures, training or other controls. Confirm the site-specific equipment and applicable requirements before ordering.
- Category
- Safe Condition Signs
- Sign selection
- Confirm against site requirements
- Artwork
- Off-the-shelf design supplied as shown
- Product code
- PS-FAE011
Available materials
| Material | Specification |
|---|---|
| Polypropylene (1.6mm) | Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure. Indicative service life: Medium-term use; site conditions apply. Typical use: Warehouses, factories, permanent indoor/outdoor. |
| Self-Adhesive Vinyl (Sticker) | Peel-and-stick vinyl for smooth surfaces. Walls, doors, machinery, and equipment labelling. Indicative service life: Short- to medium-term use; surface and exposure affect service life. Typical use: Indoor walls, equipment labels, smooth surfaces. |
| Corflute (5mm) | Lightweight corrugated plastic board. Easy to fix to fences, hoarding, and temporary structures. Indicative service life: Temporary use; exposure and installation affect service life. Typical use: Construction sites, temporary signage, events. |
| Colorbond Steel (0.6mm) | Rigid coated sheet steel suited to demanding indoor and outdoor installations. Print life depends on finish, exposure, edges and mounting. Indicative service life: Long-term substrate; print and site conditions apply. Typical use: Permanent installations, harsh environments. |
Available sizes
- • 300 x 200mm (Compact)
- • 450 x 300mm (Medium)
Volume pricing — Polypropylene (1.6mm) · 200 x 300mm (Compact) (inc. GST)
| Quantity | Unit price | Saving |
|---|---|---|
| 1-4 | $26.90 | — |
| 5-9 | $24.75 | -8% |
| 10-24 | $22.87 | -15% |
| 25-49 | $20.44 | -24% |
| 50-99 | $18.29 | -32% |
| 100+ | $16.14 | -40% |
Prices shown for the listed material/size combination. Full configuration pricing is available at https://www.platinumsigns.com.au/safety-signs/safe-condition/spill-kit-sign.
Frequently asked
What exactly is printed on this Spill Kit sign?
The approved landscape artwork has a green field, white border and the exact two-line legend SPILL KIT. It is text-only: there is no pictogram, directional arrow, logo or GHS hazard symbol.
Does the sign include a spill kit or spill-response supplies?
No. This product is the printed location sign only. It does not include a spill kit, absorbents, PPE, disposal containers, installation, inspection, restocking, training, a response procedure or a spill-response service.
Where should the Spill Kit sign be installed?
Install it at, above or immediately beside the spill kit it identifies, where the complete face can be seen on the normal approach without obstructing access to the equipment. Keep the marker aligned with the kit if equipment or site layouts change.
Can this sign direct people to a spill kit around a corner?
Not by itself. The approved artwork has no arrow, so it identifies the equipment location rather than a route. Use separately verified directional signs at genuine decision points when the spill kit cannot be seen from the approach.
Which material and size should I choose?
Polypropylene is the default rigid option. Vinyl suits a clean, smooth surface, Corflute suits temporary placement, and Colorbond steel provides a stronger mechanically fixed face. Choose 300 × 200 mm for compact close-range identification or 450 × 300 mm for greater prominence. Optional holes apply only to rigid materials.
What volume discounts apply?
Automatic volume pricing is 5–9 signs: 8% off, 10–24 signs: 15% off, 25–49 signs: 24% off, 50–99 signs: 32% off, 100+ signs: 40% off. The configurator is the source of truth and updates the unit price as quantity changes.