General Waste Sign – Bin & Waste Station Identification
Product code: PS-REC001
A clear portrait General Waste sign for identifying residual-waste bins and disposal points at workplaces, shared facilities and waste stations.
Material
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
Includes $2.45 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $27.00 | — |
| 5-9 | $24.84 | 8% off |
| 10-24 | $22.95 | 15% off |
| 25-49 | $20.52 | 24% off |
| 50-99 | $18.36 | 32% off |
| 100+ | $16.20 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $27.00 | — |
| 5-9 | $24.84 | 8% off |
| 10-24 | $22.95 | 15% off |
| 25-49 | $20.52 | 24% off |
| 50-99 | $18.36 | 32% off |
| 100+ | $16.20 | 40% off |
Product details
Identify the disposal point before an item is discarded
Mount the sign on the bin, immediately above the opening or at the decision point within a waste station. Keep the complete face visible before disposal and separate it from recycling and organics labels.
Match the sign to the collection service
Confirm accepted and excluded items with the council, building manager or waste contractor. The illustrations provide quick cues only and should not override the service's current instructions.
Choose the portrait size and installation material
Choose 225 × 300 mm for a close bin or cupboard approach, 300 × 450 mm for a shared station, or 450 × 600 mm for a larger or visually busy area. Match 3 mm Corflute, 1.6 mm polypropylene, self-adhesive vinyl or 0.6 mm Colorbond steel to the surface, exposure and fixing method.
Keep problem waste in the correct stream
Do not use this general label to authorise disposal of batteries, chemicals, e-waste, sharps, clinical waste or other controlled material. Provide a dedicated collection point and specific instructions where the service requires them.
Check the sign format before ordering
This is a general waste-stream identification sign. It does not certify a bin, define a universal accepted-items list or authorise disposal of hazardous, clinical or problem waste. Confirm accepted and excluded items with the actual collection service.
Before ordering
- Confirm that the bin or opening is for general residual waste.
- Check accepted and excluded items with the actual collection service.
- Choose 225 × 300 mm, 300 × 450 mm or 450 × 600 mm for the normal approach.
- Choose polypropylene, vinyl, 3 mm Corflute or Colorbond for the mounting surface and exposure.
- Position the sign directly beside the correct opening and remove conflicting waste labels.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Product guidance reviewed by Platinum Signs product and editorial team. Last reviewed: .
Material options
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Indicative durability: Medium-term use; site conditions apply · Typical use: Warehouses, factories, permanent indoor/outdoor
Peel-and-stick vinyl for smooth surfaces. Walls, doors, machinery, and equipment labelling.
Indicative durability: Short- to medium-term use; surface and exposure affect service life · Typical use: Indoor walls, equipment labels, smooth surfaces
Lightweight corrugated plastic board. Easy to fix to fences, hoarding, and temporary structures.
Indicative durability: Temporary use; exposure and installation affect service life · Typical use: Construction sites, temporary signage, events
Rigid coated sheet steel suited to demanding indoor and outdoor installations. Print life depends on finish, exposure, edges and mounting.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent installations, harsh environments
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 225 x 300mm | Up to 5m | Indoor, close range |
| 300 x 450mm | Up to 10m | Standard indoor/outdoor |
| 450 x 600mm | Up to 15m | Outdoor, site entrances |
Optional finishes
Pre-drilled Holes (4 corners)
4 pre-drilled mounting holes in each corner for easy screw or cable-tie installation.
Available with rigid materials only.
Lamination
Clear protective overlaminate for added UV and scratch resistance. Service life still depends on the print, exposure, cleaning and installation.
Available with vinyl or aluminium only.
Reflective Class 1 (High Intensity)
High-intensity prismatic reflective film. Confirm the grade required by the project specification and relevant authority.
Available with vinyl or aluminium only.
Reflective Class 2 (Engineer Grade)
Engineer-grade reflective film for general site visibility. Confirm suitability for the lighting, approach distance and project specification.
Available with vinyl or aluminium only.
Specifications
| Product code | PS-REC001 |
|---|---|
| Selected SKU | PS-REC001-225X300-PP16 |
| Product | General Waste Sign – Bin & Waste Station Identification |
| Category | Recycling Signs |
| Format guidance | General residual-waste bin identification; confirm accepted and excluded items with the collection service |
| Printing | UV direct print |
| Selected material | Polypropylene (1.6mm) |
| Selected size | 225 x 300mm (Small) |
| Indicative durability | Medium-term use; site conditions apply |
| Indicative viewing distance | Up to 5m |
| Available sizes | 225 x 300mm (Small), 300 x 450mm (Medium), 450 x 600mm (Large) |
| Available materials | Polypropylene (1.6mm), Self-Adhesive Vinyl (Sticker), Corflute (3mm), Colorbond Steel (0.6mm) |
Selected specifications update with the material and size controls above.
Frequently asked questions
What does this General Waste sign identify?
It identifies a residual or general-waste bin, rubbish opening or disposal point and helps separate that stream from recycling and organics. The illustrations are visual cues, not a universal list of accepted items.
Where should the sign be installed?
Place it on or immediately above the matching bin, lid or opening where people can read the complete face before discarding an item. Keep it clearly separated from recycling, organics and other waste-stream labels.
Does every pictured item belong in general waste?
Not necessarily. Accepted and excluded items vary between councils, buildings and commercial collection services. Confirm the rules for the actual service before installing the sign.
Can batteries, chemicals or hazardous waste go in this bin?
This sign does not authorise that disposal. Batteries, e-waste, chemicals, oils, paint, sharps, clinical waste and other problem waste may require separate collection and instructions.
Which material and size should I choose?
Polypropylene is the default rigid option. Self-adhesive vinyl suits a clean, smooth bin or wall and is sold in packs of three. 3 mm Corflute suits temporary stations, while Colorbond steel provides a stronger mechanically fixed face. Choose 225 × 300 mm, 300 × 450 mm or 450 × 600 mm for the actual approach and mounting position.
What volume discounts apply?
Automatic volume pricing is 5–9 signs: 8% off, 10–24 signs: 15% off, 25–49 signs: 24% off, 50–99 signs: 32% off, 100+ signs: 40% off. The configurator is the source of truth and updates the unit price as quantity changes.
