No Access Sign
Product code: PSS-PRO-008
The No Access sign enforces entry restrictions with the AS 1319 red prohibition symbol — a clear, legally recognised signal that unauthorised personnel must not proceed. Deploy it at gates, doorways, hazardous areas, or secured zones where access control is non-negotiable.
Material
Lightweight corrugated plastic board. Easy to fix to fences, hoarding, and temporary structures.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
This configuration is temporarily unavailable. Choose another material or size, or contact us for help.
Open printable data sheet in a new tabProduct details
The No Access sign enforces entry restrictions with the AS 1319 red prohibition symbol — a clear, legally recognised signal that unauthorised personnel must not proceed. Deploy it at gates, doorways, hazardous areas, or secured zones where access control is non-negotiable.
Available in corflute, polypropylene, Colorbond, and vinyl in sizes from 225×300 mm to 600×900 mm. Optional reflective Class 1 or 2 coating, lamination, and pre-drilled holes suit indoor and outdoor installations.
Platinum Signs supports trade accounts with volume discounts and rapid delivery across Australia. Customisation available for larger orders.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|
Specifications
| Product code | PSS-PRO-008 |
|---|---|
| Product | No Access Sign |
| Category | Prohibition Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Corflute (5mm) |
| Selected size | 225 x 300,300mm |
| Indicative durability | Temporary use; exposure and installation affect service life |
| Indicative viewing distance | Confirm for the site |
| Available sizes | |
| Available materials |
Selected specifications update with the material and size controls above.
Frequently asked questions
Is a No Access sign legally required in Australia?
AS 1319 does not mandate a No Access sign by law, but it is the recognised standard format for prohibition signage. Many organisations and insurers require it to demonstrate due diligence in controlling entry to hazardous or restricted areas.
What size should I choose for an office door or equipment room?
Available sizes are 225 x 300,300mm. Viewing-distance notes are a practical selection aid, not a substitute for checking the approach distance, lighting, mounting position, wording and site risk assessment.
Can I use this sign indoors and outdoors?
Yes. Corflute and polypropylene work indoors and in covered outdoor areas. For exposed outdoor use (rain, UV, salt spray), choose Colorbond or polypropylene with Class 2 reflective finish for longevity.
How should I install a No Access sign?
Mount at eye level (1.4–1.8 m) on or near the entry point, well-lit and unobstructed. We supply pre-drilled holes; use corrosion-resistant fasteners (stainless steel or coach bolts) for outdoor installations.
Do you offer trade account discounts?
Automatic volume pricing is 5–9 signs: 8% off, 10–24 signs: 15% off, 25–49 signs: 24% off, 50–99 signs: 32% off, 100+ signs: 40% off. The configurator is the source of truth and updates the unit price as quantity changes.
