End Clearway Sign
Product code: PSS-TRF-273
Mark the end of a clearway zone with this essential traffic sign, preventing driver confusion at restriction boundaries. Offered in two square formats (600×600 mm and 900×900 mm), both are manufactured from 3 mm aluminium and comply with AS 1319 road signage standards. Class 2 reflective backing is available to enhance visibility in darkness. Platinum Signs supplies these to traffic authorities, parking enforcement contractors, and road maintenance teams across Australia, with flexible bulk pricing and dependable delivery.
Material specification
This product is supplied only in Aluminium (1.6mm); choose the approved size below.
Use the size in the approved traffic-control plan or road-authority specification.
Includes $10.00 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $109.95 | — |
| 5-9 | $101.15 | 8% off |
| 10-24 | $93.46 | 15% off |
| 25-49 | $83.56 | 24% off |
| 50-99 | $74.77 | 32% off |
| 100+ | $65.97 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $109.95 | — |
| 5-9 | $101.15 | 8% off |
| 10-24 | $93.46 | 15% off |
| 25-49 | $83.56 | 24% off |
| 50-99 | $74.77 | 32% off |
| 100+ | $65.97 | 40% off |
Product details
Mark the end of a clearway zone with this essential traffic sign, preventing driver confusion at restriction boundaries. Offered in two square formats (600×600 mm and 900×900 mm), both are manufactured from 3 mm aluminium and comply with AS 1319 road signage standards. Class 2 reflective backing is available to enhance visibility in darkness. Platinum Signs supplies these to traffic authorities, parking enforcement contractors, and road maintenance teams across Australia, with flexible bulk pricing and dependable delivery.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Rigid aluminium sheet suited to long-term signage where corrosion resistance and dimensional stability matter.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent outdoor installations and high-durability sites
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 600 x 600mm | Project-specific | Road and traffic applications |
| 900 x 900mm | Project-specific | Road and traffic applications |
Optional finishes
Reflective Class 2 (Engineer Grade)
Engineer-grade reflective film for general site visibility. Confirm suitability for the lighting, approach distance and project specification.
Available with vinyl or aluminium only.
Specifications
| Product code | PSS-TRF-273 |
|---|---|
| Product | End Clearway Sign |
| Category | Parking Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Aluminium (1.6mm) |
| Selected size | 600 x 600mm |
| Indicative durability | Long-term substrate; print and site conditions apply |
| Indicative viewing distance | Project-specific |
| Available sizes | 600 x 600mm, 900 x 900mm |
| Available materials | Aluminium (1.6mm) |
Selected specifications update with the material and size controls above.
Frequently asked questions
Why is the 'End Clearway' sign square rather than rectangular?
The square format (600×600 or 900×900 mm) is the standard AS 1319 configuration for termination signs, making it instantly recognisable to drivers as a zone boundary change.
Should I use reflective backing for end-of-zone signs?
Reflective grades provide different visibility performance. Choose the grade required by the project specification and site conditions, and confirm any road, traffic or high-risk requirement with the relevant authority before ordering.
How far apart should 'End Clearway' signs be placed?
Typically one sign per zone termination point. For long clearway stretches, place additional signs at major intersections. Consult your local traffic authority for specific spacing guidelines.
Can I order both sizes together for a larger project?
Absolutely. Mix-and-match orders are welcome. Bulk pricing applies to the total quantity, so ordering 10 units across both sizes qualifies for volume discounts.
What's the typical installation height?
Mount at 1.5–2.5 metres on a post or wall bracket, aligned with other traffic signage in the area. Ensure the sign is unobstructed and visible from at least 50 metres away.
