Platinum Signs
End Clearway Sign
PSS-TRF-273 · Product data sheet
Data sheet
5 August 2026
https://www.platinumsigns.com.au
Description
Mark the end of a clearway zone with this essential traffic sign, preventing driver confusion at restriction boundaries. Offered in two square formats (600×600 mm and 900×900 mm), both are manufactured from 3 mm aluminium and comply with AS 1319 road signage standards. Class 2 reflective backing is available to enhance visibility in darkness. Platinum Signs supplies these to traffic authorities, parking enforcement contractors, and road maintenance teams across Australia, with flexible bulk pricing and dependable delivery.
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
- Category
- Parking Signs
- Sign selection
- Confirm against site requirements
- Artwork
- Off-the-shelf design supplied as shown
- Product code
- PSS-TRF-273
Available materials
| Material | Specification |
|---|---|
| Aluminium (1.6mm) | Rigid aluminium sheet suited to long-term signage where corrosion resistance and dimensional stability matter. Indicative service life: Long-term substrate; print and site conditions apply. Typical use: Permanent outdoor installations and high-durability sites. |
Available sizes
- • 600 x 600mm
- • 900 x 900mm
Volume pricing — Aluminium (1.6mm) · 600 x 600mm (inc. GST)
| Quantity | Unit price | Saving |
|---|---|---|
| 1-4 | $109.95 | — |
| 5-9 | $101.15 | -8% |
| 10-24 | $93.46 | -15% |
| 25-49 | $83.56 | -24% |
| 50-99 | $74.77 | -32% |
| 100+ | $65.97 | -40% |
Prices shown for the listed material/size combination. Full configuration pricing is available at https://www.platinumsigns.com.au/safety-signs/parking/end-clearway.
Frequently asked
Why is the 'End Clearway' sign square rather than rectangular?
The square format (600×600 or 900×900 mm) is the standard AS 1319 configuration for termination signs, making it instantly recognisable to drivers as a zone boundary change.
Should I use reflective backing for end-of-zone signs?
Reflective grades provide different visibility performance. Choose the grade required by the project specification and site conditions, and confirm any road, traffic or high-risk requirement with the relevant authority before ordering.
How far apart should 'End Clearway' signs be placed?
Typically one sign per zone termination point. For long clearway stretches, place additional signs at major intersections. Consult your local traffic authority for specific spacing guidelines.
Can I order both sizes together for a larger project?
Absolutely. Mix-and-match orders are welcome. Bulk pricing applies to the total quantity, so ordering 10 units across both sizes qualifies for volume discounts.
What's the typical installation height?
Mount at 1.5–2.5 metres on a post or wall bracket, aligned with other traffic signage in the area. Ensure the sign is unobstructed and visible from at least 50 metres away.