Thank You For Not Smoking Sign
Product code: PSS-NS-WKP-0014
"Thank You For Not Smoking" delivers a courteous-tone reminder suited to retail shops, hospitality venues, and customer-facing service environments where brand warmth matters. This soft-touch approach maintains a welcoming atmosphere while communicating your smoking policy.
Material
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
Includes $1.64 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $18.00 | — |
| 5-9 | $16.56 | 8% off |
| 10-24 | $15.30 | 15% off |
| 25-49 | $13.68 | 24% off |
| 50-99 | $12.24 | 32% off |
| 100+ | $10.80 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $18.00 | — |
| 5-9 | $16.56 | 8% off |
| 10-24 | $15.30 | 15% off |
| 25-49 | $13.68 | 24% off |
| 50-99 | $12.24 | 32% off |
| 100+ | $10.80 | 40% off |
Product details
"Thank You For Not Smoking" delivers a courteous-tone reminder suited to retail shops, hospitality venues, and customer-facing service environments where brand warmth matters. This soft-touch approach maintains a welcoming atmosphere while communicating your smoking policy.
Note: this sign is a supplementary reminder, not a legal substitute for state-mandated entrance signage. Pair it with the prescribed prohibition sign at your entrance to ensure full compliance under NSW, VIC, QLD, SA, WA, TAS, NT, and ACT Tobacco Acts. Available in vinyl, polypropylene, and Colorbond in sizes 180×250 mm to 450×600 mm, with optional holes and lamination. Trade discounts apply on bulk orders.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Peel-and-stick vinyl for smooth surfaces. Walls, doors, machinery, and equipment labelling.
Indicative durability: Short- to medium-term use; surface and exposure affect service life · Typical use: Indoor walls, equipment labels, smooth surfaces
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Indicative durability: Medium-term use; site conditions apply · Typical use: Warehouses, factories, permanent indoor/outdoor
Rigid coated sheet steel suited to demanding indoor and outdoor installations. Print life depends on finish, exposure, edges and mounting.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent installations, harsh environments
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 180 x 250mm | Up to 3m | Indoor recycling stations and waste rooms |
| 225 x 300mm | Up to 5m | Indoor, close range |
| 300 x 450mm | Up to 10m | Standard indoor/outdoor |
| 450 x 600mm | Up to 15m | Outdoor, site entrances |
Optional finishes
Pre-drilled Holes (4 corners)
4 pre-drilled mounting holes in each corner for easy screw or cable-tie installation.
Available with rigid materials only.
Lamination
Clear protective overlaminate for added UV and scratch resistance. Service life still depends on the print, exposure, cleaning and installation.
Available with vinyl or aluminium only.
Specifications
| Product code | PSS-NS-WKP-0014 |
|---|---|
| Product | Thank You For Not Smoking Sign |
| Category | No Smoking Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Polypropylene (1.6mm) |
| Selected size | 180 x 250mm (Compact) |
| Indicative durability | Medium-term use; site conditions apply |
| Indicative viewing distance | Up to 3m |
| Available sizes | 180 x 250mm (Compact), 225 x 300mm (Small), 300 x 450mm (Medium), 450 x 600mm (Large) |
| Available materials | Self-Adhesive Vinyl (Sticker), Polypropylene (1.6mm), Colorbond Steel (0.6mm) |
Selected specifications update with the material and size controls above.
Frequently asked questions
Can I use this instead of a mandatory no-smoking sign?
The appropriate safety-sign category, wording, placement and supporting controls depend on the product purpose, site risk and applicable jurisdiction. Confirm the requirement with your WHS adviser or regulator; a sign alone does not discharge WHS duties.
Where works best for this sign in a cafe or shop?
Near tables, at the counter, or in customer seating areas. It reinforces policy in spaces where customers might otherwise assume smoking is allowed.
Does the tone affect compliance?
Tone does not change legal status. A courteous message is equally enforceable; it simply suits customer-facing venues better than blunt prohibition wording.
What material is most durable for a busy cafe?
Polypropylene resists scratches and spills well in high-traffic indoor settings. Lamination adds extra protection against moisture and wear.
Can I order different sizes for different areas?
Yes. You can mix sizes and materials in one order. Bulk pricing applies to the total unit count, regardless of size variation.
