No Smoking (Compact) Sign
Product code: PSS-NS-WKP-0004
Compact No Smoking sign in standard AS 1319 format, purpose-built for restricted wall space in lift lobbies, stairwells, and narrow corridors. Photoluminescent (glow-in-the-dark) material available for emergency egress compliance and after-hours visibility where ambient light is low. Sizes range from 180×250mm to 600×900mm in vinyl, polypropylene, Colorbond, or photoluminescent finishes.
Material
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
Includes $1.64 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $18.00 | — |
| 5-9 | $16.56 | 8% off |
| 10-24 | $15.30 | 15% off |
| 25-49 | $13.68 | 24% off |
| 50-99 | $12.24 | 32% off |
| 100+ | $10.80 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $18.00 | — |
| 5-9 | $16.56 | 8% off |
| 10-24 | $15.30 | 15% off |
| 25-49 | $13.68 | 24% off |
| 50-99 | $12.24 | 32% off |
| 100+ | $10.80 | 40% off |
Product details
Compact No Smoking sign in standard AS 1319 format, purpose-built for restricted wall space in lift lobbies, stairwells, and narrow corridors. Photoluminescent (glow-in-the-dark) material available for emergency egress compliance and after-hours visibility where ambient light is low. Sizes range from 180×250mm to 600×900mm in vinyl, polypropylene, Colorbond, or photoluminescent finishes.
Photoluminescent material charges from any light source and glows for up to 90 minutes after darkness falls—valuable for stairwell safety during power outages. Platinum Signs supplies photoluminescent stock for NCC 2022 Specification 25 compliance. Lamination and mounting holes included as extras.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Peel-and-stick vinyl for smooth surfaces. Walls, doors, machinery, and equipment labelling.
Indicative durability: Short- to medium-term use; surface and exposure affect service life · Typical use: Indoor walls, equipment labels, smooth surfaces
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Indicative durability: Medium-term use; site conditions apply · Typical use: Warehouses, factories, permanent indoor/outdoor
Rigid coated sheet steel suited to demanding indoor and outdoor installations. Print life depends on finish, exposure, edges and mounting.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent installations, harsh environments
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 180 x 250mm | Up to 3m | Indoor recycling stations and waste rooms |
| 225 x 300mm | Up to 5m | Indoor, close range |
| 300 x 450mm | Up to 10m | Standard indoor/outdoor |
| 450 x 600mm | Up to 15m | Outdoor, site entrances |
| 600 x 900mm | Up to 25m | Large sites, high visibility |
Optional finishes
Pre-drilled Holes (4 corners)
4 pre-drilled mounting holes in each corner for easy screw or cable-tie installation.
Available with rigid materials only.
Lamination
Clear protective overlaminate for added UV and scratch resistance. Service life still depends on the print, exposure, cleaning and installation.
Available with vinyl or aluminium only.
Specifications
| Product code | PSS-NS-WKP-0004 |
|---|---|
| Product | No Smoking (Compact) Sign |
| Category | No Smoking Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Polypropylene (1.6mm) |
| Selected size | 180 x 250mm (Compact) |
| Indicative durability | Medium-term use; site conditions apply |
| Indicative viewing distance | Up to 3m |
| Available sizes | 180 x 250mm (Compact), 225 x 300mm (Small), 300 x 450mm (Medium), 450 x 600mm (Large), 600 x 900mm (Extra Large) |
| Available materials | Self-Adhesive Vinyl (Sticker), Polypropylene (1.6mm), Colorbond Steel (0.6mm), photoluminescent |
Selected specifications update with the material and size controls above.
Frequently asked questions
How long does photoluminescent material glow in darkness?
Up to 90 minutes after the light source is removed. It recharges continuously from ambient light—daylight, fluorescent, and LED all work. Particularly useful in stairwells and corridors during power outages.
Is photoluminescent material more expensive than standard vinyl?
The appropriate safety-sign category, wording, placement and supporting controls depend on the product purpose, site risk and applicable jurisdiction. Confirm the requirement with your WHS adviser or regulator; a sign alone does not discharge WHS duties.
What sizes are available?
Available sizes are 180 x 250mm (Compact), 225 x 300mm (Small), 300 x 450mm (Medium), 450 x 600mm (Large), 600 x 900mm (Extra Large). Viewing-distance notes are a practical selection aid, not a substitute for checking the approach distance, lighting, mounting position, wording and site risk assessment.
Can I combine photoluminescent with lamination?
Yes. Lamination protects the photoluminescent surface from wear and moisture, extending its useful life in humid or high-traffic areas.
Does this meet Australian workplace safety standards?
The appropriate safety-sign category, wording, placement and supporting controls depend on the product purpose, site risk and applicable jurisdiction. Confirm the requirement with your WHS adviser or regulator; a sign alone does not discharge WHS duties.
