Smoking Area Sign
Product code: PSS-NS-DSM-0001
This sign designates a permitted smoking zone within a workplace that operates a hybrid smoking policy. It marks the boundary of the designated area, clearly informing smokers they have entered a lawful smoking location.
Material
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
Includes $1.64 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $18.00 | — |
| 5-9 | $16.56 | 8% off |
| 10-24 | $15.30 | 15% off |
| 25-49 | $13.68 | 24% off |
| 50-99 | $12.24 | 32% off |
| 100+ | $10.80 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $18.00 | — |
| 5-9 | $16.56 | 8% off |
| 10-24 | $15.30 | 15% off |
| 25-49 | $13.68 | 24% off |
| 50-99 | $12.24 | 32% off |
| 100+ | $10.80 | 40% off |
Product details
This sign designates a permitted smoking zone within a workplace that operates a hybrid smoking policy. It marks the boundary of the designated area, clearly informing smokers they have entered a lawful smoking location.
State legislation varies: NSW and Victoria require minimum 4 m clearance from building entrances; Queensland mandates 5 m; other states range 4–10 m. Position this sign at the zone perimeter and pair it with "No Smoking Within X Metres" notices at building entries for full compliance.
Offered in colorbond, polypropylene, or vinyl in four sizes from 180×250 mm to 450×600 mm. Optional lamination and pre-drilled holes streamline installation. Bulk pricing available for multi-site workplace networks.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Rigid coated sheet steel suited to demanding indoor and outdoor installations. Print life depends on finish, exposure, edges and mounting.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent installations, harsh environments
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Indicative durability: Medium-term use; site conditions apply · Typical use: Warehouses, factories, permanent indoor/outdoor
Peel-and-stick vinyl for smooth surfaces. Walls, doors, machinery, and equipment labelling.
Indicative durability: Short- to medium-term use; surface and exposure affect service life · Typical use: Indoor walls, equipment labels, smooth surfaces
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 180 x 250mm | Up to 3m | Indoor recycling stations and waste rooms |
| 225 x 300mm | Up to 5m | Indoor, close range |
| 300 x 450mm | Up to 10m | Standard indoor/outdoor |
| 450 x 600mm | Up to 15m | Outdoor, site entrances |
Optional finishes
Pre-drilled Holes (4 corners)
4 pre-drilled mounting holes in each corner for easy screw or cable-tie installation.
Available with rigid materials only.
Lamination
Clear protective overlaminate for added UV and scratch resistance. Service life still depends on the print, exposure, cleaning and installation.
Available with vinyl or aluminium only.
Specifications
| Product code | PSS-NS-DSM-0001 |
|---|---|
| Product | Smoking Area Sign |
| Category | No Smoking Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Polypropylene (1.6mm) |
| Selected size | 180 x 250mm (Compact) |
| Indicative durability | Medium-term use; site conditions apply |
| Indicative viewing distance | Up to 3m |
| Available sizes | 180 x 250mm (Compact), 225 x 300mm (Small), 300 x 450mm (Medium), 450 x 600mm (Large) |
| Available materials | Colorbond Steel (0.6mm), Polypropylene (1.6mm), Self-Adhesive Vinyl (Sticker) |
Selected specifications update with the material and size controls above.
Frequently asked questions
What's the correct distance from the building entrance in my state?
NSW/VIC: 4 m minimum. QLD: 5 m. SA/WA/TAS/NT/ACT: 4–10 m (check your local workplace health authority). Always confirm with your state's legislation before finalising the zone boundary.
Do I need both this sign and 'No Smoking' notices?
Yes. Place this sign at the zone boundary to identify the permitted area. Post 'No Smoking Within X Metres' signs at building entrances, car parks, and other smoke-free zones to complete your signage system.
Which material is best for outdoor smoking areas?
Colorbond offers superior UV and weather resistance for permanent outdoor zones. Polypropylene suits semi-sheltered courtyards. Vinyl is adequate for covered or low-traffic areas.
Can I add lamination to protect against rain?
Yes. Lamination extends the life of vinyl and polypropylene signs in wet conditions, though colorbond is already weather-sealed. Choose lamination for high-moisture environments.
What if we relocate the smoking zone later?
Order a new sign for the revised boundary. Contact us for bulk pricing if you're updating multiple sites or zones simultaneously.
