Extinguish Before Entering Sign
Product code: PSS-NS-IND-0009
This sign marks the threshold where all ignition sources must cease—cigarettes, lighters, soldering irons, hot-work tools. Essential at fuel depots, paint booths, chemical-handling rooms, and any space where flammable vapours or dust demand zero active ignition before entry. Use it in tandem with perimeter No Smoking signage to enforce a complete fire-prevention zone.
Material
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
Includes $1.64 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $18.00 | — |
| 5-9 | $16.56 | 8% off |
| 10-24 | $15.30 | 15% off |
| 25-49 | $13.68 | 24% off |
| 50-99 | $12.24 | 32% off |
| 100+ | $10.80 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $18.00 | — |
| 5-9 | $16.56 | 8% off |
| 10-24 | $15.30 | 15% off |
| 25-49 | $13.68 | 24% off |
| 50-99 | $12.24 | 32% off |
| 100+ | $10.80 | 40% off |
Product details
This sign marks the threshold where all ignition sources must cease—cigarettes, lighters, soldering irons, hot-work tools. Essential at fuel depots, paint booths, chemical-handling rooms, and any space where flammable vapours or dust demand zero active ignition before entry. Use it in tandem with perimeter No Smoking signage to enforce a complete fire-prevention zone.
Vinyl, polypropylene, and Colorbond options suit indoor, damp, and outdoor installations. Three sizes—180×250 mm, 300×450 mm, 450×600 mm—let you match visibility distance and wall space. Lamination and hole-drilling are standard add-ons for trade accounts. Platinum Signs delivers Australia-wide with bulk discounts and custom finishing.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Peel-and-stick vinyl for smooth surfaces. Walls, doors, machinery, and equipment labelling.
Indicative durability: Short- to medium-term use; surface and exposure affect service life · Typical use: Indoor walls, equipment labels, smooth surfaces
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Indicative durability: Medium-term use; site conditions apply · Typical use: Warehouses, factories, permanent indoor/outdoor
Rigid coated sheet steel suited to demanding indoor and outdoor installations. Print life depends on finish, exposure, edges and mounting.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent installations, harsh environments
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 180 x 250mm | Up to 3m | Indoor recycling stations and waste rooms |
| 300 x 450mm | Up to 10m | Standard indoor/outdoor |
| 450 x 600mm | Up to 15m | Outdoor, site entrances |
Optional finishes
Pre-drilled Holes (4 corners)
4 pre-drilled mounting holes in each corner for easy screw or cable-tie installation.
Available with rigid materials only.
Lamination
Clear protective overlaminate for added UV and scratch resistance. Service life still depends on the print, exposure, cleaning and installation.
Available with vinyl or aluminium only.
Specifications
| Product code | PSS-NS-IND-0009 |
|---|---|
| Product | Extinguish Before Entering Sign |
| Category | No Smoking Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Polypropylene (1.6mm) |
| Selected size | 180 x 250mm (Compact) |
| Indicative durability | Medium-term use; site conditions apply |
| Indicative viewing distance | Up to 3m |
| Available sizes | 180 x 250mm (Compact), 300 x 450mm (Medium), 450 x 600mm (Large) |
| Available materials | Self-Adhesive Vinyl (Sticker), Polypropylene (1.6mm), Colorbond Steel (0.6mm) |
Selected specifications update with the material and size controls above.
Frequently asked questions
What counts as an ignition source under this sign?
Any active or potential flame or spark: lit cigarettes, lighters, matches, soldering irons, grinders, welding torches, and hot work equipment. All must be extinguished or removed before crossing the threshold.
Should I use this with a No Smoking sign as well?
Yes — this sign is most effective paired with a No Smoking sign at the perimeter. Together they create a complete fire-control message: no smoking outside, no ignition at all inside.
Which size is best for a paint-booth entrance?
300×450 mm or 450×600 mm works well for personnel approaching from a distance; 180×250 mm suits tight doorways or secondary access points.
Is this sign compliant with Australian fire codes?
It aligns with fire-safety best practice and state workplace health and safety requirements for hazardous-atmosphere zones. Check your local fire authority for specific mandatory signage.
Can I order custom text or graphics?
Yes — contact our trade team with your site-specific requirements. We can modify layout, add facility names, or adjust messaging to suit your safety protocols.
