Emergency Assembly Point 1 Sign – Muster Location
Product code: PS-FAE027
Mark the gathering area identified as Point 1 with the exact green-and-white portrait artwork shown. The site must confirm the location, routes and emergency arrangements separately.
Material
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
Includes $2.35 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $25.90 | — |
| 5-9 | $23.83 | 8% off |
| 10-24 | $22.01 | 15% off |
| 25-49 | $19.68 | 24% off |
| 50-99 | $17.61 | 32% off |
| 100+ | $15.54 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $25.90 | — |
| 5-9 | $23.83 | 8% off |
| 10-24 | $22.01 | 15% off |
| 25-49 | $19.68 | 24% off |
| 50-99 | $17.61 | 32% off |
| 100+ | $15.54 | 40% off |
Product details
Match the fixed Point 1 artwork
Order this design only when the current emergency plan and evacuation information call the location Point 1. The numeral is built into the artwork and is not a customisable field. Use the separately verified product or quote path if the site needs another number, a letter or an unnumbered muster point.
Mark the actual gathering area
Install the sign at the assembly area itself, not at a doorway or junction that still requires route guidance. Keep the full face visible on the normal approaches and consider vehicles, stock, temporary fencing, landscaping and gathered occupants when selecting the height and position.
Choose the material and portrait size
Polypropylene is the default rigid option. Vinyl suits a prepared smooth surface, Corflute suits temporary placement, and Colorbond steel provides a stronger mechanically fixed face. Choose 300 × 450 mm for a closer approach, 450 × 600 mm for greater prominence, or 600 × 900 mm for a larger or visually busy open area.
Keep routes and emergency procedures aligned
The two inward arrows are part of the assembly pictogram and do not direct a left or right turn. Check that evacuation diagrams, directional signs, training, drills, head-count arrangements and the physical Point 1 location all agree. Reassess the signage after layout, access or emergency-plan changes.
Check the sign format before ordering
This printed sign marks a location already designated as Emergency Assembly Point 1. It does not choose or validate the gathering area, provide evacuation directions, implement the emergency plan or certify the site. Confirm the location, routes, procedures and applicable requirements with the people responsible for the workplace.
- Standards Australia – AS 1319:1994 Safety signs for the occupational environment — AS 1319 specifies requirements for the design and use of safety signs intended for the occupational environment. Referencing the standard does not certify this printed product or establish that a particular assembly location is suitable. Read source (opens in a new tab)Standard reference only; confirm the applicable sign category, design, use and site requirements for the project.
- Safe Work Australia – Emergency plans and procedures — Safe Work Australia states that workplace emergency plans must cover emergency procedures, evacuation, communication, testing, information, training and instruction. Its guidance notes that a workplace map may show assembly points and that training can include evacuations and assembly points. Read source (opens in a new tab)General national guidance; WHS regulation and enforcement sit with the relevant Commonwealth, state or territory jurisdiction.
Before ordering
- Confirm that the current emergency plan designates this location as Emergency Assembly Point 1.
- Check that the exact people pictogram, inward arrows, legend and fixed numeral 1 match the intended site message.
- Have the responsible site people confirm the gathering location, access, hazards, capacity and accountability arrangements.
- Choose the portrait size, material and fixing approach for the surface, exposure and normal sightlines.
- Check evacuation diagrams, route signs, training, testing and emergency procedures separately from the sign order.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Product guidance reviewed by Platinum Signs product and editorial team. Last reviewed: .
Material options
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Indicative durability: Medium-term use; site conditions apply · Typical use: Warehouses, factories, permanent indoor/outdoor
Peel-and-stick vinyl for smooth surfaces. Walls, doors, machinery, and equipment labelling.
Indicative durability: Short- to medium-term use; surface and exposure affect service life · Typical use: Indoor walls, equipment labels, smooth surfaces
Lightweight corrugated plastic board. Easy to fix to fences, hoarding, and temporary structures.
Indicative durability: Temporary use; exposure and installation affect service life · Typical use: Construction sites, temporary signage, events
Rigid coated sheet steel suited to demanding indoor and outdoor installations. Print life depends on finish, exposure, edges and mounting.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent installations, harsh environments
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 300 x 450mm | Up to 10m | Standard indoor/outdoor |
| 450 x 600mm | Up to 15m | Outdoor, site entrances |
| 600 x 900mm | Up to 25m | Large sites, high visibility |
Optional finishes
Pre-drilled Holes (4 corners)
4 pre-drilled mounting holes in each corner for easy screw or cable-tie installation.
Available with rigid materials only.
Lamination
Clear protective overlaminate for added UV and scratch resistance. Service life still depends on the print, exposure, cleaning and installation.
Available with vinyl or aluminium only.
Specifications
| Product code | PS-FAE027 |
|---|---|
| Selected SKU | PS-FAE027-300X450-PP16 |
| Product | Emergency Assembly Point 1 Sign – Muster Location |
| Category | Emergency Signs |
| Format guidance | Green-and-white portrait emergency-information sign with group pictogram, two inward arrows and fixed EMERGENCY ASSEMBLY POINT 1 legend |
| Printing | UV direct print |
| Selected material | Polypropylene (1.6mm) |
| Selected size | 300 x 450mm (Medium) |
| Indicative durability | Medium-term use; site conditions apply |
| Indicative viewing distance | Up to 10m |
| Available sizes | 300 x 450mm (Medium), 450 x 600mm (Large), 600 x 900mm (Extra Large) |
| Available materials | Polypropylene (1.6mm), Self-Adhesive Vinyl (Sticker), Corflute (5mm), Colorbond Steel (0.6mm) |
Selected specifications update with the material and size controls above.
Frequently asked questions
What exactly is printed on this assembly-point sign?
The approved portrait artwork has a green field, a white group-of-people assembly pictogram, two arrows pointing inward toward the group, and the exact legend EMERGENCY ASSEMBLY POINT 1. The numeral 1 is fixed artwork, not a custom field.
Are the inward arrows evacuation directions?
No. The two arrows converge on the group as part of the assembly-point symbol; they do not tell a person to turn left or right along an evacuation route. Use the site's current evacuation plan, diagrams and separately verified directional signs for route decisions.
Where should Emergency Assembly Point 1 be installed?
Install it only at the gathering area identified as Point 1 in the site's current emergency plan. Keep the complete face visible on normal approaches and check that vehicles, stock, landscaping, temporary fencing or gathered people will not obscure it.
Does this sign validate the assembly area?
No. This is the printed location marker only. It does not select or validate the assembly area, prepare or implement an emergency plan, train workers, run drills, account for people or certify compliance. Those decisions remain site-specific responsibilities.
Which material, size and mounting option should I choose?
Polypropylene is the default rigid option. Vinyl suits a clean, smooth surface, Corflute suits temporary placement, and Colorbond steel provides a stronger mechanically fixed face. Choose 300 × 450 mm for a closer approach, 450 × 600 mm for greater prominence, or 600 × 900 mm for a larger open area. Optional holes apply only to rigid materials.
What volume discounts apply?
Automatic volume pricing is 5–9 signs: 8% off, 10–24 signs: 15% off, 25–49 signs: 24% off, 50–99 signs: 32% off, 100+ signs: 40% off. The configurator is the source of truth and updates the unit price as quantity changes.
