Platinum Signs
Emergency Assembly Point Sign – Muster Location
PS-FAE027 · Product data sheet
Data sheet
20 September 2026
https://www.platinumsigns.com.au
Description
Use this Emergency Assembly Point sign at a gathering location already identified in the site's current emergency plan. The verified landscape artwork has a green field and the exact white legend EMERGENCY ASSEMBLY POINT. It contains no point number, letter, pictogram or route arrow, so it suits an unnumbered assembly location and must not be treated as a directional sign. The verified landscape offer uses 300 × 225 mm, 450 × 300 mm and 600 × 450 mm. Polypropylene is the default rigid option for routine indoor, sheltered and general site use. Self-adhesive vinyl suits a clean smooth surface, 3 mm Corflute suits temporary placement, and Colorbond steel provides a stronger face for mechanical fixing. Optional mounting holes apply only to rigid materials, while lamination is available only when the configurator shows a compatible choice. Position the sign at the actual assembly area where the complete face can be seen on normal approaches. Check for parked vehicles, stored goods, fencing, landscaping and people gathering below the sign. Where occupants need directions before reaching the point, use separately verified directional signs whose arrows match the actual route and keep evacuation diagrams and procedures aligned. This product is the printed sign only. It does not choose or validate a safe assembly area, provide a post or fixings, prepare or implement an emergency plan, direct an evacuation, train workers, run drills, account for occupants or certify compliance. The people responsible for the workplace must confirm the location, access, hazards, capacity, routes, accountability arrangements and applicable jurisdictional requirements before ordering and after site changes.
This printed sign marks an unnumbered emergency assembly point. It does not choose or validate the gathering location, provide evacuation directions, implement an emergency plan or certify the site. Confirm the location, routes, procedures and applicable requirements with the people responsible for the workplace.
- Category
- Emergency Signs
- Sign selection
- Marks an emergency assembly point; the artwork contains no route arrow and no point number.
- Artwork
- Off-the-shelf design supplied as shown
- Product code
- PS-FAE027
Available materials
| Material | Specification |
|---|---|
| Polypropylene (1.6mm) | Rigid polypropylene panel for routine indoor, sheltered and general site use. Use suitable fixings for the mounting surface; optional holes are available. |
| Self-Adhesive Vinyl (Sticker) | Self-adhesive vinyl for a clean, dry, smooth compatible surface. Prepare the surface before application; mounting holes do not apply. |
| Corflute (3mm) | Lightweight Corflute panel for temporary placement. Support and secure the panel against movement; optional holes are available. |
| Colorbond Steel (0.6mm) | Rigid Colorbond steel face for mechanical fixing. Use compatible fixings and a firm mounting surface; optional holes are available. |
Available sizes
- • 300 x 225mm — Polypropylene (1.6mm) / Self-Adhesive Vinyl (Sticker) / Corflute (3mm) / Colorbond Steel (0.6mm)
- • 450 x 300mm — Polypropylene (1.6mm) / Self-Adhesive Vinyl (Sticker) / Corflute (3mm) / Colorbond Steel (0.6mm)
- • 600 x 450mm — Polypropylene (1.6mm) / Self-Adhesive Vinyl (Sticker) / Corflute (3mm) / Colorbond Steel (0.6mm)
Volume pricing — Polypropylene (1.6mm) · 300x225 (inc. GST)
| Quantity | Unit price | Saving |
|---|---|---|
| 1 | $26.95 | — |
| 5 | $24.79 | -8% |
| 10 | $22.91 | -15% |
| 25 | $20.48 | -24% |
| 50 | $18.33 | -32% |
| 100+ | $16.17 | -40% |
Prices shown for the listed material/size combination and quantities. Savings increase gradually between these quantities. Full configuration pricing is available at https://www.platinumsigns.com.au/safety-signs/emergency/emergency-assembly-point-sign.
Frequently asked
What is printed on this Emergency Assembly Point sign?
The approved landscape artwork has a green field and the exact white legend EMERGENCY ASSEMBLY POINT. It has no number, letter, pictogram or route arrow.
Is this sign suitable for Emergency Assembly Point 1?
Only if the site requires the unnumbered wording shown. This artwork does not include the numeral 1. Use a separately verified numbered design when the emergency plan identifies Point 1.
Does the sign choose or approve the assembly location?
No. The responsible workplace people must select and assess the location, capacity, access, hazards, routes and accountability arrangements through the current emergency plan.
Can this sign direct people around a corner?
Not by itself. The approved artwork has no arrow. Use separately verified directional signs at genuine route decisions and make sure their arrows match the actual evacuation route.
Which material and size should I choose?
Polypropylene is the default rigid option. Vinyl suits a clean smooth surface, Corflute suits temporary placement, and Colorbond steel suits stronger mechanical fixing. Choose 300 × 225, 450 × 300 or 600 × 450 mm according to the approach and visibility.
What volume discounts apply?
Current volume pricing is calculated automatically from the selected configuration and quantity. Use the volume-pricing table for the live unit price.
