Warning — High Voltage Risk Of Electrocution Sign
Product code: PSS-ELEC-021
A comprehensive electrical hazard warning that explicitly communicates the risk of electrocution, this multi-message sign is ideal for high-traffic areas where staff need clear, detailed information about electrical dangers. Meets AS 1319 requirements for electrical safety communication in workplaces and industrial facilities.
Material
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
Includes $2.45 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $27.00 | — |
| 5-9 | $24.84 | 8% off |
| 10-24 | $22.95 | 15% off |
| 25-49 | $20.52 | 24% off |
| 50-99 | $18.36 | 32% off |
| 100+ | $16.20 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $27.00 | — |
| 5-9 | $24.84 | 8% off |
| 10-24 | $22.95 | 15% off |
| 25-49 | $20.52 | 24% off |
| 50-99 | $18.36 | 32% off |
| 100+ | $16.20 | 40% off |
Product details
A comprehensive electrical hazard warning that explicitly communicates the risk of electrocution, this multi-message sign is ideal for high-traffic areas where staff need clear, detailed information about electrical dangers. Meets AS 1319 requirements for electrical safety communication in workplaces and industrial facilities.
Supplied in Colorbond, polypropylene, or vinyl in three sizes from 225×300 mm to 450×600 mm. Pre-drilled holes simplify installation on fences, equipment enclosures, and control panels. Trade customers benefit from volume discounts and fast Australia-wide shipping.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Rigid coated sheet steel suited to demanding indoor and outdoor installations. Print life depends on finish, exposure, edges and mounting.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent installations, harsh environments
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Indicative durability: Medium-term use; site conditions apply · Typical use: Warehouses, factories, permanent indoor/outdoor
Peel-and-stick vinyl for smooth surfaces. Walls, doors, machinery, and equipment labelling.
Indicative durability: Short- to medium-term use; surface and exposure affect service life · Typical use: Indoor walls, equipment labels, smooth surfaces
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 225 x 300mm | Up to 5m | Indoor, close range |
| 300 x 450mm | Up to 10m | Standard indoor/outdoor |
| 450 x 600mm | Up to 15m | Outdoor, site entrances |
Optional finishes
Pre-drilled Holes (4 corners)
4 pre-drilled mounting holes in each corner for easy screw or cable-tie installation.
Available with rigid materials only.
Specifications
| Product code | PSS-ELEC-021 |
|---|---|
| Product | Warning — High Voltage Risk Of Electrocution Sign |
| Category | Electrical Safety Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Polypropylene (1.6mm) |
| Selected size | 225 x 300mm (Small) |
| Indicative durability | Medium-term use; site conditions apply |
| Indicative viewing distance | Up to 5m |
| Available sizes | 225 x 300mm (Small), 300 x 450mm (Medium), 450 x 600mm (Large) |
| Available materials | Colorbond Steel (0.6mm), Polypropylene (1.6mm), Self-Adhesive Vinyl (Sticker) |
Selected specifications update with the material and size controls above.
Frequently asked questions
Is this sign suitable for switchboard areas?
Yes, the detailed messaging makes it ideal for control rooms, switchboards, and electrical plant rooms where staff need explicit hazard information.
What's the difference between this and the 'Keep Out' sign?
This sign emphasises the specific consequence (electrocution risk), making it more informative for areas where workers may approach but need clear hazard awareness.
How do I choose between Colorbond and polypropylene?
Colorbond suits exposed outdoor sites; polypropylene is lighter, cheaper, and ideal for indoor or semi-sheltered locations.
Do you offer custom text or sizing?
We stock standard AS 1319 designs; contact us to discuss custom specifications for larger orders.
What's your bulk discount structure?
Automatic volume pricing is 5–9 signs: 8% off, 10–24 signs: 15% off, 25–49 signs: 24% off, 50–99 signs: 32% off, 100+ signs: 40% off. The configurator is the source of truth and updates the unit price as quantity changes.
