Danger — 415 Volts Sign
Product code: PSS-ELEC-002
Guard against three-phase electrical hazards with this AS 1319 compliant 415-volt danger sign. The standard red danger format with lightning bolt pictogram ensures compliance across commercial and industrial sites using motors, compressors, HVAC systems, and three-phase distribution boards.
Material
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
Includes $2.45 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $27.00 | — |
| 5-9 | $24.84 | 8% off |
| 10-24 | $22.95 | 15% off |
| 25-49 | $20.52 | 24% off |
| 50-99 | $18.36 | 32% off |
| 100+ | $16.20 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $27.00 | — |
| 5-9 | $24.84 | 8% off |
| 10-24 | $22.95 | 15% off |
| 25-49 | $20.52 | 24% off |
| 50-99 | $18.36 | 32% off |
| 100+ | $16.20 | 40% off |
Product details
Guard against three-phase electrical hazards with this AS 1319 compliant 415-volt danger sign. The standard red danger format with lightning bolt pictogram ensures compliance across commercial and industrial sites using motors, compressors, HVAC systems, and three-phase distribution boards.
Available in Colorbond, polypropylene, aluminium, or vinyl in sizes from 225×300 mm to 600×900 mm. Reflective Class 1 and Class 2 options enhance visibility in switchrooms and outdoor substations. Mounting holes included. Platinum Signs delivers Australia-wide and offers tiered bulk pricing for multi-site electrical installations.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Rigid coated sheet steel suited to demanding indoor and outdoor installations. Print life depends on finish, exposure, edges and mounting.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent installations, harsh environments
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Indicative durability: Medium-term use; site conditions apply · Typical use: Warehouses, factories, permanent indoor/outdoor
Rigid aluminium sheet suited to long-term signage where corrosion resistance and dimensional stability matter.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent outdoor installations and high-durability sites
Peel-and-stick vinyl for smooth surfaces. Walls, doors, machinery, and equipment labelling.
Indicative durability: Short- to medium-term use; surface and exposure affect service life · Typical use: Indoor walls, equipment labels, smooth surfaces
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 225 x 300mm | Up to 5m | Indoor, close range |
| 300 x 450mm | Up to 10m | Standard indoor/outdoor |
| 450 x 600mm | Up to 15m | Outdoor, site entrances |
| 600 x 900mm | Up to 25m | Large sites, high visibility |
Optional finishes
Pre-drilled Holes (4 corners)
4 pre-drilled mounting holes in each corner for easy screw or cable-tie installation.
Available with rigid materials only.
Reflective Class 1 (High Intensity)
High-intensity prismatic reflective film. Confirm the grade required by the project specification and relevant authority.
Available with vinyl or aluminium only.
Reflective Class 2 (Engineer Grade)
Engineer-grade reflective film for general site visibility. Confirm suitability for the lighting, approach distance and project specification.
Available with vinyl or aluminium only.
Specifications
| Product code | PSS-ELEC-002 |
|---|---|
| Product | Danger — 415 Volts Sign |
| Category | Electrical Safety Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Polypropylene (1.6mm) |
| Selected size | 225 x 300mm (Small) |
| Indicative durability | Medium-term use; site conditions apply |
| Indicative viewing distance | Up to 5m |
| Available sizes | 225 x 300mm (Small), 300 x 450mm (Medium), 450 x 600mm (Large), 600 x 900mm (Extra Large) |
| Available materials | Colorbond Steel (0.6mm), Polypropylene (1.6mm), Aluminium (1.6mm), Self-Adhesive Vinyl (Sticker) |
Selected specifications update with the material and size controls above.
Frequently asked questions
What equipment in my facility operates at 415V?
Three-phase 415V is standard for industrial motors, large air-conditioning systems, commercial kitchen equipment, lifts, compressors, and three-phase distribution boards in Australian businesses.
Is a 415V sign mandatory under Australian law?
The appropriate safety-sign category, wording, placement and supporting controls depend on the product purpose, site risk and applicable jurisdiction. Confirm the requirement with your WHS adviser or regulator; a sign alone does not discharge WHS duties.
What size sign should I order for a large distribution board?
Available sizes are 225 x 300mm (Small), 300 x 450mm (Medium), 450 x 600mm (Large), 600 x 900mm (Extra Large). Viewing-distance notes are a practical selection aid, not a substitute for checking the approach distance, lighting, mounting position, wording and site risk assessment.
Can I use the same sign for indoor and outdoor installations?
Yes, but consider reflective Class 2 for outdoor substations or dimly lit areas. Colorbond material also provides superior weather resistance compared to polypropylene.
Do you offer discounts for electrical contractors?
Automatic volume pricing is 5–9 signs: 8% off, 10–24 signs: 15% off, 25–49 signs: 24% off, 50–99 signs: 32% off, 100+ signs: 40% off. The configurator is the source of truth and updates the unit price as quantity changes.
