Warning — Risk Of Electric Shock / Use Lockout Device Sign
Product code: PSS-ELEC-025
This dual-message safety sign addresses both the hazard and its control in a single, clear format. It warns of electric shock risk whilst instructing workers to engage lockout devices before work begins. Manufactured to AS 1319 standards, the sign combines visual impact with practical instruction for maintenance and installation teams.
Material
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
Includes $2.45 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $27.00 | — |
| 5-9 | $24.84 | 8% off |
| 10-24 | $22.95 | 15% off |
| 25-49 | $20.52 | 24% off |
| 50-99 | $18.36 | 32% off |
| 100+ | $16.20 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $27.00 | — |
| 5-9 | $24.84 | 8% off |
| 10-24 | $22.95 | 15% off |
| 25-49 | $20.52 | 24% off |
| 50-99 | $18.36 | 32% off |
| 100+ | $16.20 | 40% off |
Product details
This dual-message safety sign addresses both the hazard and its control in a single, clear format. It warns of electric shock risk whilst instructing workers to engage lockout devices before work begins. Manufactured to AS 1319 standards, the sign combines visual impact with practical instruction for maintenance and installation teams.
Offered in three materials — Colorbond steel for outdoor durability, polypropylene for general indoor use, and vinyl for temporary applications — with sizes from 225×300 mm to 450×600 mm. Mounting holes are available on request. Trade accounts receive bulk discounts, and we deliver Australia-wide from our Sydney facility.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Rigid coated sheet steel suited to demanding indoor and outdoor installations. Print life depends on finish, exposure, edges and mounting.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent installations, harsh environments
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Indicative durability: Medium-term use; site conditions apply · Typical use: Warehouses, factories, permanent indoor/outdoor
Peel-and-stick vinyl for smooth surfaces. Walls, doors, machinery, and equipment labelling.
Indicative durability: Short- to medium-term use; surface and exposure affect service life · Typical use: Indoor walls, equipment labels, smooth surfaces
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 225 x 300mm | Up to 5m | Indoor, close range |
| 300 x 450mm | Up to 10m | Standard indoor/outdoor |
| 450 x 600mm | Up to 15m | Outdoor, site entrances |
Optional finishes
Pre-drilled Holes (4 corners)
4 pre-drilled mounting holes in each corner for easy screw or cable-tie installation.
Available with rigid materials only.
Specifications
| Product code | PSS-ELEC-025 |
|---|---|
| Product | Warning — Risk Of Electric Shock / Use Lockout Device Sign |
| Category | Electrical Safety Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Polypropylene (1.6mm) |
| Selected size | 225 x 300mm (Small) |
| Indicative durability | Medium-term use; site conditions apply |
| Indicative viewing distance | Up to 5m |
| Available sizes | 225 x 300mm (Small), 300 x 450mm (Medium), 450 x 600mm (Large) |
| Available materials | Colorbond Steel (0.6mm), Polypropylene (1.6mm), Self-Adhesive Vinyl (Sticker) |
Selected specifications update with the material and size controls above.
Frequently asked questions
What's the difference between this sign and a standard electric shock warning?
The appropriate safety-sign category, wording, placement and supporting controls depend on the product purpose, site risk and applicable jurisdiction. Confirm the requirement with your WHS adviser or regulator; a sign alone does not discharge WHS duties.
Which material should I choose for an outdoor switchboard area?
Colorbond steel offers the best weather resistance for exposed outdoor locations; polypropylene works well in covered switchboard rooms; vinyl is suitable for temporary installations or indoor use.
Can I order these in bulk with a trade discount?
Automatic volume pricing is 5–9 signs: 8% off, 10–24 signs: 15% off, 25–49 signs: 24% off, 50–99 signs: 32% off, 100+ signs: 40% off. The configurator is the source of truth and updates the unit price as quantity changes.
Do the mounting holes come standard?
Yes. Four-corner pre-drilled holes are an optional extra with a base surcharge of $3.00 inc GST per sign for the listed configurations, before any applicable volume discount. Select the option to update the configured total before adding to cart.
How quickly can you deliver to regional NSW or Queensland?
We dispatch from Sydney within 2 business days; standard delivery to regional areas is 3–5 working days. Express options are available on request.
