Did You Remember To Remove Your Locks And Tags? Sign
Product code: PSS-ELEC-031
A critical reminder placed at exit points of maintenance areas: workers must remove their personal locks and tags before leaving. This sign reinforces the final step of your lockout–tagout procedure, reducing the risk of forgotten locks that could delay equipment restart or compromise the integrity of your LOTO system.
Material
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
Includes $2.45 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $27.00 | — |
| 5-9 | $24.84 | 8% off |
| 10-24 | $22.95 | 15% off |
| 25-49 | $20.52 | 24% off |
| 50-99 | $18.36 | 32% off |
| 100+ | $16.20 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $27.00 | — |
| 5-9 | $24.84 | 8% off |
| 10-24 | $22.95 | 15% off |
| 25-49 | $20.52 | 24% off |
| 50-99 | $18.36 | 32% off |
| 100+ | $16.20 | 40% off |
Product details
A critical reminder placed at exit points of maintenance areas: workers must remove their personal locks and tags before leaving. This sign reinforces the final step of your lockout–tagout procedure, reducing the risk of forgotten locks that could delay equipment restart or compromise the integrity of your LOTO system.
Available in polypropylene or vinyl, 225×300 mm or 300×450 mm. Polypropylene suits indoor workshops; vinyl withstands outdoor and high-moisture environments. Optional pre-drilled holes speed installation.
Support your safety culture with signage that prompts compliance at the point of action. Trade pricing and bulk discounts apply. Australia-wide dispatch from Sydney.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Indicative durability: Medium-term use; site conditions apply · Typical use: Warehouses, factories, permanent indoor/outdoor
Peel-and-stick vinyl for smooth surfaces. Walls, doors, machinery, and equipment labelling.
Indicative durability: Short- to medium-term use; surface and exposure affect service life · Typical use: Indoor walls, equipment labels, smooth surfaces
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 225 x 300mm | Up to 5m | Indoor, close range |
| 300 x 450mm | Up to 10m | Standard indoor/outdoor |
Optional finishes
Pre-drilled Holes (4 corners)
4 pre-drilled mounting holes in each corner for easy screw or cable-tie installation.
Available with rigid materials only.
Specifications
| Product code | PSS-ELEC-031 |
|---|---|
| Product | Did You Remember To Remove Your Locks And Tags? Sign |
| Category | Electrical Safety Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Polypropylene (1.6mm) |
| Selected size | 225 x 300mm (Small) |
| Indicative durability | Medium-term use; site conditions apply |
| Indicative viewing distance | Up to 5m |
| Available sizes | 225 x 300mm (Small), 300 x 450mm (Medium) |
| Available materials | Polypropylene (1.6mm), Self-Adhesive Vinyl (Sticker) |
Selected specifications update with the material and size controls above.
Frequently asked questions
Where should this sign be positioned?
Install at the exit point of maintenance areas, equipment rooms, or work zones—anywhere workers finish their LOTO task and leave the area.
What material should I choose for a humid or outdoor workshop?
Vinyl is the better choice for damp environments, chemical exposure, or outdoor mounting. It resists moisture, UV fading, and cleaning solvents.
Can I customise the text or size?
Yes. Contact our team for custom wording or non-standard dimensions. Bulk custom orders may qualify for additional discounts.
How durable is polypropylene in a busy workshop?
Polypropylene is hard-wearing for dry indoor use but can become brittle in UV exposure or extreme temperature swings. Vinyl is more resilient in harsh conditions.
Do you stock these signs or is it made to order?
Standard configurations are in stock and ship within 3–5 business days. Custom orders may take longer; we'll confirm lead time at quotation.
