Lock-Out Equipment Sign
Product code: PSS-ELEC-032
Clearly mark the storage location of lockout devices—padlocks, hasps, tags, circuit breaker lockouts, and other LOTO equipment. A dedicated, labelled storage point ensures workers can quickly locate and return devices, supporting consistent lockout–tagout practice across your facility.
Material
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
Includes $2.45 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $27.00 | — |
| 5-9 | $24.84 | 8% off |
| 10-24 | $22.95 | 15% off |
| 25-49 | $20.52 | 24% off |
| 50-99 | $18.36 | 32% off |
| 100+ | $16.20 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $27.00 | — |
| 5-9 | $24.84 | 8% off |
| 10-24 | $22.95 | 15% off |
| 25-49 | $20.52 | 24% off |
| 50-99 | $18.36 | 32% off |
| 100+ | $16.20 | 40% off |
Product details
Clearly mark the storage location of lockout devices—padlocks, hasps, tags, circuit breaker lockouts, and other LOTO equipment. A dedicated, labelled storage point ensures workers can quickly locate and return devices, supporting consistent lockout–tagout practice across your facility.
Supplied in polypropylene or vinyl, 225×300 mm or 300×450 mm. Polypropylene is economical for sheltered indoor areas; vinyl offers superior durability in workshops subject to moisture, heat, or chemical splash. Pre-drilled mounting holes available.
Integrate this sign into your LOTO infrastructure to reinforce procedure compliance. Trade accounts benefit from volume pricing. Delivered Australia-wide from our Sydney facility.
Check the sign format before ordering
Final sign type, wording, size, placement and material depend on the site risk, project specification and applicable jurisdiction. Confirm the requirement with the relevant WHS adviser or regulator.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Material options
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Indicative durability: Medium-term use; site conditions apply · Typical use: Warehouses, factories, permanent indoor/outdoor
Peel-and-stick vinyl for smooth surfaces. Walls, doors, machinery, and equipment labelling.
Indicative durability: Short- to medium-term use; surface and exposure affect service life · Typical use: Indoor walls, equipment labels, smooth surfaces
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 225 x 300mm | Up to 5m | Indoor, close range |
| 300 x 450mm | Up to 10m | Standard indoor/outdoor |
Optional finishes
Pre-drilled Holes (4 corners)
4 pre-drilled mounting holes in each corner for easy screw or cable-tie installation.
Available with rigid materials only.
Specifications
| Product code | PSS-ELEC-032 |
|---|---|
| Product | Lock-Out Equipment Sign |
| Category | Electrical Safety Signs |
| Format guidance | Confirm the safety-sign category and project specification for the site |
| Printing | UV direct print |
| Selected material | Polypropylene (1.6mm) |
| Selected size | 225 x 300mm (Small) |
| Indicative durability | Medium-term use; site conditions apply |
| Indicative viewing distance | Up to 5m |
| Available sizes | 225 x 300mm (Small), 300 x 450mm (Medium) |
| Available materials | Polypropylene (1.6mm), Self-Adhesive Vinyl (Sticker) |
Selected specifications update with the material and size controls above.
Frequently asked questions
What size should I order for a small equipment room?
Available sizes are 225 x 300mm (Small), 300 x 450mm (Medium). Viewing-distance notes are a practical selection aid, not a substitute for checking the approach distance, lighting, mounting position, wording and site risk assessment.
Is this sign required by safety regulations?
While not explicitly mandated, a clearly labelled lockout equipment store is best practice under AS 1319 and supports your LOTO program documentation and audits.
Can I order multiple signs for different storage locations?
Absolutely. Bulk orders of 5, 10, or more units attract volume discounts. Request a quote for your full facility needs.
How do I install this sign on a metal cabinet or toolbox?
Use the pre-drilled holes with self-tapping screws or adhesive-backed mounting. For metal surfaces, we recommend screwing through the holes for a secure, permanent fix.
Will vinyl fade if the sign is exposed to sunlight?
Vinyl is UV-resistant and maintains colour better than polypropylene in sunlit areas. For long-term outdoor or window-facing installation, vinyl is the preferred choice.
