Danger High Voltage Sign – Keep Out
Product code: PS-ELEC012
Communicate a site-confirmed high-voltage keep-out instruction with the exact red, black and white DANGER artwork shown. The site must establish the electrical boundary and controls separately.
Material
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Viewing distance is indicative; check approach distance, lighting and mounting position for the site.
Includes $2.54 GST
- Australia-wide shipping; live or quoted freight depends on order size
- Off-the-shelf safety-sign artwork is supplied as shown; no design proof is required.
- Dispatch timing depends on current stock and order quantity.
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $27.90 | — |
| 5-9 | $25.67 | 8% off |
| 10-24 | $23.72 | 15% off |
| 25-49 | $21.20 | 24% off |
| 50-99 | $18.97 | 32% off |
| 100+ | $16.74 | 40% off |
View volume pricing
| Quantity | Unit (inc GST) | Discount |
|---|---|---|
| 1-4 | $27.90 | — |
| 5-9 | $25.67 | 8% off |
| 10-24 | $23.72 | 15% off |
| 25-49 | $21.20 | 24% off |
| 50-99 | $18.97 | 32% off |
| 100+ | $16.74 | 40% off |
Product details
Communicate the exact keep-out instruction
Use this sign only where the site's electrical risk assessment and procedures call for the exact DANGER HIGH VOLTAGE KEEP OUT message. Place it at the identified enclosure, room, gate or approach and keep the complete signal word and instruction visible before a person reaches the site-confirmed boundary.
Confirm the danger format and access boundary
This red, black and white artwork has no lightning symbol, stated voltage or unauthorised-personnel line. A competent person should confirm whether this exact danger-format instruction, the separate yellow High Voltage warning sign, a more specific access restriction or additional electrical labels are required. The printed sign does not establish the boundary or physically keep people out.
Select the material and landscape size
Polypropylene is the default rigid option. Vinyl suits a prepared smooth surface, Corflute suits temporary placement, and Colorbond steel provides a stronger mechanically fixed face. Choose from 300 × 225 mm, 450 × 300 mm, 600 × 450 mm or 900 × 600 mm using the actual approach, lighting, obstructions and project specification.
Retain every electrical risk control
Keep the face visible without covering rating plates, arc-flash labels, controls, locks, vents or instructions. The sign does not isolate, test, earth, guard, supervise or control access to electrical equipment, so retain every physical and procedural measure selected by the electrical risk assessment and safe-work procedure.
Check the sign format before ordering
This is a printed danger-format sign only. It does not determine the correct safety-sign category, state the actual voltage or energisation condition, establish an arc-flash or approach boundary, isolate, test, earth, lock out, guard, restrict access or certify the installation. Confirm the site-specific message, boundary and controls with the responsible competent people and applicable regulator.
- Standards Australia – AS 1319:1994 Safety signs for the occupational environment — AS 1319 specifies requirements for the design and use of safety signs intended for the occupational environment. Referencing the standard does not certify this product or determine that its danger format, wording, size or placement is correct for a particular electrical hazard. Read source (opens in a new tab)Standard reference only; confirm the applicable sign category, design, use and site requirements before ordering.
- Safe Work Australia – Managing electrical risks in the workplace — The model Code provides practical guidance on managing electrical risks for workplaces that control electrical equipment or carry out work on or near energised equipment. A printed danger sign is one communication measure and does not perform isolation or the other electrical risk controls. Read source (opens in a new tab)Check with the relevant regulator whether the model Code has legal effect in the jurisdiction and confirm any electricity-network or project-specific rules.
Before ordering
- Confirm that the exact DANGER HIGH VOLTAGE KEEP OUT format is the site-approved message.
- Have the responsible electrical person identify the equipment, access boundary and every normal approach.
- Check the real viewing distance, lighting and obstructions when selecting the landscape size and any compatible finish.
- Match the material and fixing method to the surface and exposure without covering equipment labels, controls, locks or ventilation.
- Confirm isolation, guarding, physical access control, procedures, supervision, training and jurisdictional requirements separately.
This is general product information, not legal or engineering advice. A safety sign is one part of a workplace control system; confirm the site and jurisdictional requirements before ordering.
Product guidance reviewed by Platinum Signs product and editorial team. Last reviewed: .
Material options
Rigid plastic sheet suited to indoor and sheltered or general outdoor applications, subject to the print finish and site exposure.
Indicative durability: Medium-term use; site conditions apply · Typical use: Warehouses, factories, permanent indoor/outdoor
Peel-and-stick vinyl for smooth surfaces. Walls, doors, machinery, and equipment labelling.
Indicative durability: Short- to medium-term use; surface and exposure affect service life · Typical use: Indoor walls, equipment labels, smooth surfaces
Lightweight corrugated plastic board. Easy to fix to fences, hoarding, and temporary structures.
Indicative durability: Temporary use; exposure and installation affect service life · Typical use: Construction sites, temporary signage, events
Rigid coated sheet steel suited to demanding indoor and outdoor installations. Print life depends on finish, exposure, edges and mounting.
Indicative durability: Long-term substrate; print and site conditions apply · Typical use: Permanent installations, harsh environments
Size guide
Viewing distances are selection aids, not prescribed compliance distances. Check the site approach, lighting, wording and mounting position.
| Size | Indicative distance | Typical use |
|---|---|---|
| 225 x 300mm | Up to 5m | Indoor, close range |
| 300 x 450mm | Up to 10m | Standard indoor/outdoor |
| 450 x 600mm | Up to 15m | Outdoor, site entrances |
| 600 x 900mm | Up to 25m | Large sites, high visibility |
Optional finishes
Pre-drilled Holes (4 corners)
4 pre-drilled mounting holes in each corner for easy screw or cable-tie installation.
Available with rigid materials only.
Lamination
Clear protective overlaminate for added UV and scratch resistance. Service life still depends on the print, exposure, cleaning and installation.
Available with vinyl or aluminium only.
Reflective Class 1 (High Intensity)
High-intensity prismatic reflective film. Confirm the grade required by the project specification and relevant authority.
Available with vinyl or aluminium only.
Reflective Class 2 (Engineer Grade)
Engineer-grade reflective film for general site visibility. Confirm suitability for the lighting, approach distance and project specification.
Available with vinyl or aluminium only.
Specifications
| Product code | PS-ELEC012 |
|---|---|
| Selected SKU | PS-ELEC012-300X225-PP16 |
| Product | Danger High Voltage Sign – Keep Out |
| Category | Electrical Safety Signs |
| Format guidance | Landscape danger format with black header, red oval and white DANGER signal word above the exact HIGH VOLTAGE KEEP OUT message; no pictogram or stated voltage |
| Printing | UV direct print |
| Selected material | Polypropylene (1.6mm) |
| Selected size | 300 x 225mm (Small) |
| Indicative durability | Medium-term use; site conditions apply |
| Indicative viewing distance | Up to 5m |
| Available sizes | 300 x 225mm (Small), 450 x 300mm (Medium), 600 x 450mm (Large), 900 x 600mm (Extra Large) |
| Available materials | Polypropylene (1.6mm), Self-Adhesive Vinyl (Sticker), Corflute (5mm), Colorbond Steel (0.6mm) |
Selected specifications update with the material and size controls above.
Frequently asked questions
What exactly is printed on this Danger High Voltage sign?
The approved landscape artwork has a black header, red oval and white DANGER signal word above the exact two-line message HIGH VOLTAGE KEEP OUT. It has no lightning-bolt pictogram, warning triangle, voltage value, arrow, logo or printed product code.
How is this different from the yellow High Voltage warning sign?
This PS-ELEC012 product uses a red, black and white danger format and explicitly says KEEP OUT. The separate PS-WAR023 product is a yellow-and-black warning-format sign with a lightning-bolt pictogram and only HIGH VOLTAGE. A competent person should confirm the category and wording required by the site's electrical risk assessment rather than treating the products as interchangeable.
Where should the Danger High Voltage Keep Out sign be installed?
Position it at the identified door, gate, enclosure or approach where the complete DANGER and HIGH VOLTAGE KEEP OUT message is visible before entry. Do not cover rating plates, arc-flash labels, switches, locks, access hardware, vents or operating instructions, and have the responsible electrical person confirm the boundary and sign position.
Which material and finish should I choose?
Polypropylene is the default rigid option. Vinyl suits a clean, smooth surface, Corflute suits temporary placement, and Colorbond steel provides a stronger mechanically fixed face. Holes apply only to rigid materials; reflective options appear only where the selected material is compatible.
Which size should I order?
The landscape sizes are 300 × 225 mm, 450 × 300 mm, 600 × 450 mm and 900 × 600 mm. Choose using the actual approach distance, lighting, mounting height, obstructions and site specification; the configurator's viewing guidance is indicative and does not establish compliance.
Does this sign make a high-voltage area safe or compliant?
No. This is the printed danger sign only. It does not identify the actual voltage or energisation state, define an arc-flash or approach boundary, isolate or de-energise equipment, test for dead, earth conductors, lock out a supply, create a physical barrier, control access, provide PPE, perform electrical work or certify compliance.
